ISO 15680:2003
ISO 15680:2003 Water quality – Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
CDN $310.00
Description
ISO 15680:2003 specifies a general method for the determination of volatile organic compounds (VOCs) in water by purge-and-trap isolation and gas chromatography (GC). Annexes A, B and C provide examples of analytes that can be determined using ISO 15680:2003. They range from difluorodichloromethane (R-12) up to trichlorobenzene, including all non-polar organic compounds of intermediate volatility.
Detection is preferably carried out by mass spectrometry in the electron impact mode (EI), but other detectors may be applied as well.
The limit of detection largely depends on the detector in use and the operational parameters. Typically detection limits as low as 10 ng/l can be achieved. The working range typically is up to 100 micrograms per litre.
ISO 15680:2003 is applicable to drinking water, ground water, surface water, seawater and to (diluted) waste water.
Edition
1
Published Date
2003-11-04
Status
PUBLISHED
Pages
33
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
ISO 15680:2003 specifies a general method for the determination of volatile organic compounds (VOCs) in water by purge-and-trap isolation and gas chromatography (GC). Annexes A, B and C provide examples of analytes that can be determined using ISO 15680:2003. They range from difluorodichloromethane (R-12) up to trichlorobenzene, including all non-polar organic compounds of intermediate volatility.
Detection is preferably carried out by mass spectrometry in the electron impact mode (EI), but other detectors may be applied as well.
The limit of detection largely depends on the detector in use and the operational parameters. Typically detection limits as low as 10 ng/l can be achieved. The working range typically is up to 100 micrograms per litre.
ISO 15680:2003 is applicable to drinking water, ground water, surface water, seawater and to (diluted) waste water.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 21793:2020 Water quality – Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb), dissolved bound nitrogen (DNb), total bound phosphorus (TPb) and dissolved bound phosphorus (DPb) after wet chemical catalysed ozone hydroxyl radical oxidation (COHR)
CDN $310.00 Add to cart -
ISO 9964:1993 Water quality – Determination of sodium and potassium – Part 1: Determination of sodium by atomic absorption spectrometry
CDN $86.00 Add to cart -
ISO 22066:2020 Water quality – Determination of total cyanide – Method using segmented flow injection, in-line ultraviolet digestion analysis by gas diffusion and amperometric detection
CDN $195.00 Add to cart -
ISO 21676:2018 Water quality – Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water – Method using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS or -HRMS) after direct injection
CDN $310.00 Add to cart
