Sky Bear Technical Standards - Home
Search
×
FR

Placeholder headline

This is just a placeholder headline

TEMA 2026 Edition – Online Subscription Only

$

BUY NOW

Placeholder headline

This is just a placeholder headline

API RP 15SIH, 2nd Edition: Installation and Handling of Spoolable Reinforced Plastic Line Pipe

$

158

BUY NOW

Placeholder headline

This is just a placeholder headline

API RP 754, 4th Edition: Process Safety Performance Indicators for the Refining and Petrochemical Industries

$

393

BUY NOW

Placeholder headline

This is just a placeholder headline

ASME B31.1-2020: Power Piping

$

668

BUY NOW

Placeholder headline

This is just a placeholder headline

ASME B31.1-2022: Power Piping

$

668

BUY NOW

ISO 20065:2022

ISO 20065:2022 Acoustics – Objective method for assessing the audibility of tones in noise – Engineering method

CDN $307.00

Description

This document describes a method for the objective determination of the audibility of tones in environmental noise.

This document is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are captured, then this method cannot replace subjective evaluation.

NOTE      The procedure has not been validated below 50 Hz.

The method presented herein can be used in continuous measurement stations that work automatically.

Edition

1

Published Date

2022-12-19

Status

PUBLISHED

Pages

33

Language Detail Icon

English

Format Secure Icon

Secure PDF

Abstract

This document describes a method for the objective determination of the audibility of tones in environmental noise.

This document is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are captured, then this method cannot replace subjective evaluation.

NOTE      The procedure has not been validated below 50 Hz.

The method presented herein can be used in continuous measurement stations that work automatically.

Previous Editions

Can’t find what you are looking for?

Please contact us at: