
ISO 18749:2004
ISO 18749:2004 Water quality – Adsorption of substances on activated sludge – Batch test using specific analytical methods
CDN $129.00
Description
ISO 18749:2004 specifies a screening test method for the determination of the degree of adsorption of substances on to the activated sludge or primary sludge in a waste water treatment plant.
The conditions described in this International Standard normally correspond to the optimum conditions for the adsorption to occur at the chosen activated-sludge concentration and water hardness during the test period.
The method applies to substances for which an analytical method with sufficient accuracy is available and which, under the conditions of the test and at the test concentration used,
- are water-soluble;
- or, if only slightly water-soluble, allow sufficiently stable suspensions, dispersions or emulsions to be prepared;
- are not significantly removed from the test solution during the test by known abiotic processes such as stripping or foaming;
- do not deflocculate activated sludge;
- are not readily biodegradable.
Edition
1
Published Date
2004-02-03
Status
PUBLISHED
Pages
10
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
ISO 18749:2004 specifies a screening test method for the determination of the degree of adsorption of substances on to the activated sludge or primary sludge in a waste water treatment plant.
The conditions described in this International Standard normally correspond to the optimum conditions for the adsorption to occur at the chosen activated-sludge concentration and water hardness during the test period.
The method applies to substances for which an analytical method with sufficient accuracy is available and which, under the conditions of the test and at the test concentration used,
- are water-soluble;
- or, if only slightly water-soluble, allow sufficiently stable suspensions, dispersions or emulsions to be prepared;
- are not significantly removed from the test solution during the test by known abiotic processes such as stripping or foaming;
- do not deflocculate activated sludge;
- are not readily biodegradable.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

ISO 10253:2024 Water quality – Marine algal growth inhibition test with Skeletonema sp. and Phaeodactylum tricornutum
CDN $259.00 Add to cart -

ISO 17994:2014 Water quality – Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods
CDN $259.00 Add to cart -

ISO 14442:2006 Water quality – Guidelines for algal growth inhibition tests with poorly soluble materials, volatile compounds, metals and waste water
CDN $192.00 Add to cart -

ISO 16266:2018 Water quality – Detection and enumeration of Pseudomonas aeruginosa – Part 2: Most probable number method
CDN $435.00 Add to cart







