Search
×
FR

Placeholder headline

This is just a placeholder headline

API TR 5C3: Calculating Performance Properties of Pipe Used as Casing or Tubing

$

422

BUY NOW

Placeholder headline

This is just a placeholder headline

API STD 671: Special Purpose Couplings for Petroleum, Chemical and Gas Industry Services

$

502

BUY NOW

Placeholder headline

This is just a placeholder headline

Technical Report API TBD-10: Chapter 10 Surface and Interfacial Tension

$

176

BUY NOW

Placeholder headline

This is just a placeholder headline

API STD 671: Special Purpose Couplings for Petroleum, Chemical and Gas Industry Services: Errata 2

$

0

BUY NOW

Placeholder headline

This is just a placeholder headline

MSS SP-44-2026: Steel Pipeline Flanges

$

450

BUY NOW

Placeholder headline

This is just a placeholder headline

API RP 576: Inspection of Pressure-relieving Devices

$

460

BUY NOW

Placeholder headline

This is just a placeholder headline

API RP 591: Process Valve Qualification Procedure

$

226

BUY NOW

Placeholder headline

This is just a placeholder headline

API RP 576: Inspection of Pressure-relieving Devices: Addendum 1

$

0

BUY NOW

ISO 16200:2000

ISO 16200:2000 Workplace air quality – Sampling and analysis of volatile organic compounds by solvent desorption/gas chromatography – Part 2: Diffusive sampling method

CDN $273.00

Description

This part of ISO 16200 gives general guidance for the sampling and analysis of volatile organic compounds (VOCs)

in air.

This part of ISO 16200 is applicable to a wide range of VOCs, including hydrocarbons, halogenated hydrocarbons,

esters, glycol ethers, ketones and alcohols. A number of devices and sorbents are recommended for the sampling

of these VOCs, each sorbent having a different range of applicability.

NOTE Activated coconut shell charcoal is frequently used. Very polar compounds may require derivatization; very low

boiling compounds will only be partially retained by the sorbents and can only be estimated qualitatively. Semi-volatile

compounds will be fully retained by the sorbents, but may only be partially recovered.

This part of ISO 16200 is valid for the measurement of airborne vapours of VOCs in a concentration range of

approximately 1 mg/m3 to 1000 mg/m3 individual organic for an exposure time of 8 h.

The upper limit of the useful range is set by the sorptive capacity of the sorbent used and, subject to dilution of the

analysed solution, by the linear dynamic range of the gas chromatograph column and detector or by the sample

splitting capability of the analytical instrumentation used. The lower limit of the useful range depends on the noise

level of the detector and on blank levels of analyte and/or interfering artefacts on the sampling devices or in the

desorption solvent. Artefacts are typically sub-nanogram for activated charcoal, but higher levels of aromatic

hydrocarbons have been noted in some batches.

Edition

1

Published Date

2000-06-08

Status

PUBLISHED

Pages

32

Language Detail Icon

English

Format Secure Icon

Secure PDF

Abstract

This part of ISO 16200 gives general guidance for the sampling and analysis of volatile organic compounds (VOCs)

in air.

This part of ISO 16200 is applicable to a wide range of VOCs, including hydrocarbons, halogenated hydrocarbons,

esters, glycol ethers, ketones and alcohols. A number of devices and sorbents are recommended for the sampling

of these VOCs, each sorbent having a different range of applicability.

NOTE Activated coconut shell charcoal is frequently used. Very polar compounds may require derivatization; very low

boiling compounds will only be partially retained by the sorbents and can only be estimated qualitatively. Semi-volatile

compounds will be fully retained by the sorbents, but may only be partially recovered.

This part of ISO 16200 is valid for the measurement of airborne vapours of VOCs in a concentration range of

approximately 1 mg/m3 to 1000 mg/m3 individual organic for an exposure time of 8 h.

The upper limit of the useful range is set by the sorptive capacity of the sorbent used and, subject to dilution of the

analysed solution, by the linear dynamic range of the gas chromatograph column and detector or by the sample

splitting capability of the analytical instrumentation used. The lower limit of the useful range depends on the noise

level of the detector and on blank levels of analyte and/or interfering artefacts on the sampling devices or in the

desorption solvent. Artefacts are typically sub-nanogram for activated charcoal, but higher levels of aromatic

hydrocarbons have been noted in some batches.

Previous Editions

Can’t find what you are looking for?

Please contact us at: