Sky Bear Technical Standards - Home
REGISTER

FR
Search Icon
Search
×
FR

Placeholder headline

This is just a placeholder headline

B51-14 (R2019) – Boiler, pressure vessel, and pressure piping code

$

362

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-6:22 – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-6: Particular requirements for hand-held hammers (Binational standard with UL 62841-2-6)

$

598

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-6:22/A1:24 – Amendment 1:2024 to CSA C22.2 NO. 62841-2-6:22, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-6: Particular requirements for hand-held hammers (Binational standard with UL 62841-2-6)

$

111

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-5:16 (R2026) – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-5: Particular requirements for hand-held circular saws (Bi-national standard with UL 62841-2-5)

$

480

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-5:16 (R2026)/A1:26 – Amendment 1:2026 to CAN/CSA-C22.2 NO. 62841-2-5:16, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-5: Particular requirements for hand-held circular saws (Bi-national standard with UL 62841-2-5)

$

48

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 No. 62841-2-4:15/A1:26 – Amendment 1:2026 (IDT) to CAN/CSA-C22.2 No. 62841-2-4:15, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (Bi-national standard with UL 62841-2-4)

$

48

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-4:15 (R2025) – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (Bi-national standard with UL 62841-2-4)

$

167

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-3:21/A1:26 – Amendment 1:2026 to CSA C22.2 No. 62841-2-3:21, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-3: Particular requirements for handheld grinders, disc-type polishers and disc-type sanders (Binational standard with UL 62841-2-3)

$

520

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-23:25 – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-23: Particular requirements for hand-held die grinders and small rotary tools (Binational standard with IEC 62841-2-23)

$

394

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-21:18/A1:26 – Amendment 1:2026 to CAN/CSA-C22.2 No. 62841-2-21:18, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-21: Particular requirement for hand-held drain cleaners (Adopted amendment 1:2024 to IEC 62841-2-21)

$

21

BUY NOW

Awaiting product image

ISO 19905-4:2026

ISO 19905-4:2026 Site-specific assessment of mobile offshore units — Part 4: Jack-up installation and removal at a site

CDN $435.00

This publication was last reviewed and confirmed in 2026.

Site-specific assessment of mobile offshore units — Part 4: Jack-up installation and removal at a site

SKU: 97d7225224fd Category:

Description

This document specifies requirements and guidance for the installation on and removal from site of independent leg jack‑ups for use in the oil and gas industries including lower carbon energy. It addresses the assessment of:

  1. the installation operation from when the jack-up enters the defined safety zone of the host platform or the intended site to when it is elevated to the operating hull elevation above LAT and is ready for operations;
  2. the removal operation from when the jack-up is ready to jack-down to when it departs the defined safety zone.

NOTE 1        Whilst this document is for independent leg jack-ups, many of the provisions can be applied to mat-supported jack-ups.

When the jack-up has propulsion assist or is self-propelled, the provisions of this document related to positioning can be replaced or supplemented as appropriate.

This document excludes the move of the jack-up between sites and elevated operations, which are covered respectively by IMO/Class and ISO 19905-1.

NOTE 2        Whilst this document addresses the installation and removal of a jack-up at a site, RMPs normally include the move of the jack-up between sites (see example RMP in Annex E).

Edition

1

Published Date

2026-09-16

Status

PUBLISHED

Pages

95

Language Detail Icon

English

Format Secure Icon

Secure PDF

Secure – PDF details

  • Save your file locally or view it via a web viewer
  • Viewing permissions are restricted exclusively to the purchaser
  • Device limits - 3
  • Printing – Enabled only to print (1) copy

See more about our Environmental Commitment

Close

Abstract

This document specifies requirements and guidance for the installation on and removal from site of independent leg jack‑ups for use in the oil and gas industries including lower carbon energy. It addresses the assessment of:

  1. the installation operation from when the jack-up enters the defined safety zone of the host platform or the intended site to when it is elevated to the operating hull elevation above LAT and is ready for operations;
  2. the removal operation from when the jack-up is ready to jack-down to when it departs the defined safety zone.

NOTE 1        Whilst this document is for independent leg jack-ups, many of the provisions can be applied to mat-supported jack-ups.

When the jack-up has propulsion assist or is self-propelled, the provisions of this document related to positioning can be replaced or supplemented as appropriate.

This document excludes the move of the jack-up between sites and elevated operations, which are covered respectively by IMO/Class and ISO 19905-1.

NOTE 2        Whilst this document addresses the installation and removal of a jack-up at a site, RMPs normally include the move of the jack-up between sites (see example RMP in Annex E).

Previous Editions

Can’t find what you are looking for?

Please contact us at:
Contact Image

[email protected]

Related Documents

Need Help?

Customer Care

+1 587-570-4151

[email protected]

Need Help?

Customer Care

+1 234 567 8910

[email protected]

[email protected]

+1 587-570-4151

Quick Links

© 2026 Sky Bear Technical Standards Inc. All rights reserved.

Proudly Canadian