
CSA Z23500-4:26
CSA Z23500-4:26 – Preparation and quality management of fluids for haemodialysis and related therapies — Part 4: Concentrates for haemodialysis and related therapies (Adopted ISO 23500-4:2024, second edition, 2024-04, with Canadian deviations)
CDN $331.00
Preparation and quality management of fluids for haemodialysis and related therapies — Part 4: Concentrates for haemodialysis and related therapies (Adopted ISO 23500-4:2024, second edition, 2024-04, with Canadian deviations)
Description
CSA Preface This is the second edition of CSA Z23500-4, Preparation and quality management of fluids for haemodialysis and related therapies — Part 4: Concentrates for haemodialysis and related therapies , which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 23500-4 (second edition, 2024-04). It supersedes the previous edition, published in 2020 as CSA Z23500-4 (adopted ISO 23500-4:2019). For brevity, this Standard will be referred to as “CSA Z23500-4” throughout. CSA Group acknowledges that the adoption of this Standard was made possible, in part, by the financial support of the governments of Alberta, British Columbia, Manitoba, New Brunswick, Newfoundland and Labrador, Northwest Territories, Nova Scotia, Nunavut, Ontario, Prince Edward Island, Québec, Saskatchewan, and Yukon, as administered by Canada’s Drug Agency (CDA-AMC). This Standard was reviewed for Canadian adoption by the CSA Subcommittee on Quality Management for Kidney Dialysis, under the jurisdiction of the CSA Technical Committee on Kidney Dialysis and the CSA Strategic Steering Committee on Health and Well-being, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope This document specifies the chemical and microbiological requirements for concentrates used for haemodialysis and related therapies and applies to the manufacturer of such concentrates. This document is applicable to: — concentrates in both liquid and powder forms; — additives, also called spikes, which are chemicals that can be added to the concentrate to supplement or increase the concentration of one or more of the existing ions in the concentrate and thus in the final dialysis fluid; — equipment used to mix acid and bicarbonate powders into concentrate at the user’s facility. This document does not apply to: — concentrates prepared from pre-packaged salts and water at a dialysis facility for use in that facility; — pre-packaged and sterile dialysis fluid; — sorbent dialysis fluid regeneration systems that regenerate and recirculate small volumes of the dialysis fluid; — equipment to perform patient treatment; this is addressed IEC 60601-2-16. This document does not cover the dialysis fluid that is used to clinically dialyse patients. Dialysis fluid is covered in ISO 23500-5. The making of dialysis fluid involves the proportioning of concentrate and water at the bedside or in a central dialysis fluid delivery system. Although the label requirements for dialysis fluid are placed on the labelling of the concentrate, it is the user’s responsibility to ensure proper use.
Edition
Not found
Published Date
2026-10-05
Status
Not found
Pages
43
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
CSA Preface This is the second edition of CSA Z23500-4, Preparation and quality management of fluids for haemodialysis and related therapies — Part 4: Concentrates for haemodialysis and related therapies , which is an adoption, with Canadian deviations, of the identically titled ISO (International Organization for Standardization) Standard 23500-4 (second edition, 2024-04). It supersedes the previous edition, published in 2020 as CSA Z23500-4 (adopted ISO 23500-4:2019). For brevity, this Standard will be referred to as "CSA Z23500-4" throughout. CSA Group acknowledges that the adoption of this Standard was made possible, in part, by the financial support of the governments of Alberta, British Columbia, Manitoba, New Brunswick, Newfoundland and Labrador, Northwest Territories, Nova Scotia, Nunavut, Ontario, Prince Edward Island, Québec, Saskatchewan, and Yukon, as administered by Canada's Drug Agency (CDA-AMC). This Standard was reviewed for Canadian adoption by the CSA Subcommittee on Quality Management for Kidney Dialysis, under the jurisdiction of the CSA Technical Committee on Kidney Dialysis and the CSA Strategic Steering Committee on Health and Well-being, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope This document specifies the chemical and microbiological requirements for concentrates used for haemodialysis and related therapies and applies to the manufacturer of such concentrates. This document is applicable to: — concentrates in both liquid and powder forms; — additives, also called spikes, which are chemicals that can be added to the concentrate to supplement or increase the concentration of one or more of the existing ions in the concentrate and thus in the final dialysis fluid; — equipment used to mix acid and bicarbonate powders into concentrate at the user's facility. This document does not apply to: — concentrates prepared from pre-packaged salts and water at a dialysis facility for use in that facility; — pre-packaged and sterile dialysis fluid; — sorbent dialysis fluid regeneration systems that regenerate and recirculate small volumes of the dialysis fluid; — equipment to perform patient treatment; this is addressed IEC 60601-2-16. This document does not cover the dialysis fluid that is used to clinically dialyse patients. Dialysis fluid is covered in ISO 23500-5. The making of dialysis fluid involves the proportioning of concentrate and water at the bedside or in a central dialysis fluid delivery system. Although the label requirements for dialysis fluid are placed on the labelling of the concentrate, it is the user's responsibility to ensure proper use.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

CSA Z9170-1:19 (R2024) – Terminal units for medical gas pipeline systems – Part 1: Terminal units for use with compressed medical gases, vacuum, and anaesthetic gas scavenging systems (Adopted ISO 9170-1:2017, third edition, 2017-07, with Canadian deviations)
CDN $166.00 Add to cart -

Z7396.1-12 – Medical gas pipeline systems – Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems
CDN $630.00 Add to cart -

CSA Z7001:24 – Safe use of energy-based medical and surgical devices in health care
CDN $315.00 Add to cart -

Z7396.1-17 (R2022) – Medical gas pipeline systems – Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems
CDN $630.00 Add to cart







