
CSA D435:16 (R2024)
CSA D435:16 (R2024) – Accessible transit buses
CDN $139.00
Accessible transit buses
Description
Preface This is the second edition of CSA D435, Accessible transit buses . It supersedes the previous edition published in 2002. This Standard provides requirements specific to vehicles used by transit operations in their routine services. It is intended that this Standard be used to enable transit operations to integrate persons with disabilities into their normal services. This Standard is designed to complement CSA D436 which is applicable to over-the-road (inter-city) buses. It is also intended to be used in conjunction with standards issued by Transport Canada under the federal Motor Vehicle Safety Regulations. The following are the significant changes made to this edition: a) design requirements for mobility aid securement and occupant restraint (MASOR) systems (Clause 7.4) have been modified; b) requirements for the positioning of MASOR systems (Clause 7.3.2) have been modified; and c) requirements for the anchor points for MASOR systems (Clause 7.3.3) have been modified. This Standard was prepared by the Technical Committee on Motor Vehicles for the Transportation of Persons with Physical Disabilities, under the jurisdiction of the Strategic Steering Committee on Mechanical Industrial Equipment Safety, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Standard applies to accessible transit buses, as defined in Clause 3. 1.2 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. 1.3 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
Edition
Not found
Published Date
2026-10-05
Status
Not found
Pages
44
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
Preface This is the second edition of CSA D435, Accessible transit buses . It supersedes the previous edition published in 2002. This Standard provides requirements specific to vehicles used by transit operations in their routine services. It is intended that this Standard be used to enable transit operations to integrate persons with disabilities into their normal services. This Standard is designed to complement CSA D436 which is applicable to over-the-road (inter-city) buses. It is also intended to be used in conjunction with standards issued by Transport Canada under the federal Motor Vehicle Safety Regulations. The following are the significant changes made to this edition: a) design requirements for mobility aid securement and occupant restraint (MASOR) systems (Clause 7.4) have been modified; b) requirements for the positioning of MASOR systems (Clause 7.3.2) have been modified; and c) requirements for the anchor points for MASOR systems (Clause 7.3.3) have been modified. This Standard was prepared by the Technical Committee on Motor Vehicles for the Transportation of Persons with Physical Disabilities, under the jurisdiction of the Strategic Steering Committee on Mechanical Industrial Equipment Safety, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Standard applies to accessible transit buses, as defined in Clause 3. 1.2 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. 1.3 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

CSA Z1615:22 – First responder fatigue risk management system
CDN $197.00 Add to cart -

B621-09 – Selection and use of highway tanks, TC portable tanks, and other large containers for the transportation of dangerous goods, Classes 3, 4, 5, 6.1, 8, and 9
CDN $186.00 Add to cart -

CSA Z1620:24 – Core competency standards for ground search and rescue operations: Searcher, team leader, and SAR manager
CDN $189.00 Add to cart -

CSA Z605:16 (R2024) – Mobility aid securement and occupant restraint (MASOR) systems for motor vehicles
CDN $134.00 Add to cart







