
CSA/ANSI Z83.21:20 (R2025)/CSA C22.2 NO. 168:20 (R2024)
CSA/ANSI Z83.21:20 (R2025)/CSA C22.2 NO. 168:20 (R2024) – Commercial dishwashers
CDN $773.00
Commercial dishwashers
Description
Preface This is the harmonized CSA Group and UL standard for Commercial Dishwashers . It is the Third edition of CSA/ANSI Z83.21 • CSA C22.2 No. 168, and the Eighth edition of UL 921. This edition of CSA/ANSI Z83.21 • CSA C22.2 No. 168 supersedes the previous editions published in 2005 and 2016. This edition of UL 921 supersedes the previous edition published in 2016. This harmonized Standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This standard was reviewed by the CSA Joint Subcommittee on Gas Food Service Equipment under the jurisdiction of the CSA Z21/83 Technical Committee on Performance and Installation of Gas Burning Appliances and Related Accessories and the CSA Strategic Steering Committee on Fuels and Appliances. It has been formally approved by the Z21/83 Technical Committee and the Interprovincial Gas Advisory Council. This standard was also reviewed by the CSA Subcommittee on Household and Commercial Dishwashers, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. Scope 1.1 This Standard covers commercial, freestanding, under-counter, and counter-insert dishwashers, utensil-washers, and glass washers using water as the principal cleaning medium, hereafter referred to as dishwashers. These dishwashers utilize steam, gas, or electric heaters for heating the water. Heated water is provided to a dishwasher by means of steam, gas, or electric heating systems integral to the appliance, or by means not integral to the dishwasher that is provided at the installation site. 1.2 This Standard is not intended to be used to evaluate the gas-fired water heating portions of the system that incorporate water containment vessels operating above atmospheric pressure. For dishwashers that incorporate a gas-fired water heater with a pressurized water containment vessel operating above atmospheric pressure, the water heater portion of the system is covered by the requirements of ANSI Z21.10.3/CSA 4.3. 1.3 This Standard covers: a) electric dishwashers rated 600 V or less, installed in accordance with the Canadian Electrical Code (CEC), Part I , CSA C22.1, and the National Electrical Code (NEC), NFPA 70; and b) the gas-handling, gas-burning, and gas-control features of gas-fired dishwashers having inputs of 420 MJ (400,000 Btu per hour or less, limited to 3.45 kPa (0.5 psig) inlet pressure, installed in accordance with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, the International Fuel Gas Code, ICC IFGC, or the Natural Gas and Propane Installation Code, CSA B149.1 for use with: 1) natural gas; 2) manufactured gas; 3) mixed gas; 4) propane gas; 5) liquefied petroleum gases; or 6) LP gas-air mixtures. 1.4 These requirements cover dishwashers intended for use in commercial establishments, such as kitchens of restaurants and hospitals, where they are not intended to be accessible to the public.
Edition
Not found
Published Date
2026-10-05
Status
Not found
Pages
136
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
Preface This is the harmonized CSA Group and UL standard for Commercial Dishwashers . It is the Third edition of CSA/ANSI Z83.21 • CSA C22.2 No. 168, and the Eighth edition of UL 921. This edition of CSA/ANSI Z83.21 • CSA C22.2 No. 168 supersedes the previous editions published in 2005 and 2016. This edition of UL 921 supersedes the previous edition published in 2016. This harmonized Standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This standard was reviewed by the CSA Joint Subcommittee on Gas Food Service Equipment under the jurisdiction of the CSA Z21/83 Technical Committee on Performance and Installation of Gas Burning Appliances and Related Accessories and the CSA Strategic Steering Committee on Fuels and Appliances. It has been formally approved by the Z21/83 Technical Committee and the Interprovincial Gas Advisory Council. This standard was also reviewed by the CSA Subcommittee on Household and Commercial Dishwashers, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. Scope 1.1 This Standard covers commercial, freestanding, under-counter, and counter-insert dishwashers, utensil-washers, and glass washers using water as the principal cleaning medium, hereafter referred to as dishwashers. These dishwashers utilize steam, gas, or electric heaters for heating the water. Heated water is provided to a dishwasher by means of steam, gas, or electric heating systems integral to the appliance, or by means not integral to the dishwasher that is provided at the installation site. 1.2 This Standard is not intended to be used to evaluate the gas-fired water heating portions of the system that incorporate water containment vessels operating above atmospheric pressure. For dishwashers that incorporate a gas-fired water heater with a pressurized water containment vessel operating above atmospheric pressure, the water heater portion of the system is covered by the requirements of ANSI Z21.10.3/CSA 4.3. 1.3 This Standard covers: a) electric dishwashers rated 600 V or less, installed in accordance with the Canadian Electrical Code (CEC), Part I , CSA C22.1, and the National Electrical Code (NEC), NFPA 70; and b) the gas-handling, gas-burning, and gas-control features of gas-fired dishwashers having inputs of 420 MJ (400,000 Btu per hour or less, limited to 3.45 kPa (0.5 psig) inlet pressure, installed in accordance with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, the International Fuel Gas Code, ICC IFGC, or the Natural Gas and Propane Installation Code, CSA B149.1 for use with: 1) natural gas; 2) manufactured gas; 3) mixed gas; 4) propane gas; 5) liquefied petroleum gases; or 6) LP gas-air mixtures. 1.4 These requirements cover dishwashers intended for use in commercial establishments, such as kitchens of restaurants and hospitals, where they are not intended to be accessible to the public.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

CSA TS-117:23 – National technical specification for terminology for the decentralized energy industry in Canada
CDN $79.00 Add to cart -

CSA SPE-1000:25 – Model Code for the field evaluation of electrical equipment
CDN $378.00 Add to cart -

CAN/CSA-E61965:04 (R2023) – Mechanical safety of cathode ray tubes (Adopted IEC 61965:2003, second edition, 2003-07, with Canadian deviations)
CDN $356.00 Add to cart -

CSA E61558-2-13:25 – Safety of transformers, reactors, power supply units and combinations thereof — Part 2-13: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformers for general applications (Adopted IEC 61558-2-13:2022, third edition, 2022-10, with Canadian deviations) | Sécurité des transformateurs, bobines d’inductance, blocs d’alimentation et combinaisons de ces éléments — Partie 2-13 : Exigences particulières et essais pour les autotransformateurs et les blocs d’alimentation qui incorporent des autotransformateurs pour applications d’ordre général (norme IEC 61558-2-13:2022 adoptée, troisième édition, 2022-10, avec exigences propres au Canada)
CDN $205.00 Add to cart







