
CSA C22.2 NO. 295:25
CSA C22.2 NO. 295:25 – Neutral grounding resistor assemblies
CDN $409.00
Neutral grounding resistor assemblies
Description
Preface This is the second edition of CSA C22.2 No. 295, Neutral grounding resistor assemblies , one of a series of Standards issued by CSA Group under the Canadian Electrical Code, Part II. It supersedes the previous edition published in 2015 under the title, Neutral grounding devices. This edition includes requirements for neutral grounding resistor assemblies; it is intended that future editions will incorporate requirements for other neutral grounding devices as well. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Subcommittee on Ground Fault Circuit Interrupters (Neutral Grounding Assemblies), under the jurisdiction of the Technical Committee on Industrial Products and the Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Standard applies to neutral grounding resistor assemblies that are used to limit the ground fault current or the voltage to ground of an electrical power system when installed in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard applies to neutral grounding resistor assemblies for use in electrical power systems rated 72 kV line to line or less. 1.3 Neutral grounding resistor assemblies may be of an open-type for mounting in other equipment. 1.4 Neutral grounding assemblies may contain components and circuits for sensing and signalling. 1.5 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
Edition
Not found
Published Date
2026-10-05
Status
Not found
Pages
44
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
Preface This is the second edition of CSA C22.2 No. 295, Neutral grounding resistor assemblies , one of a series of Standards issued by CSA Group under the Canadian Electrical Code, Part II. It supersedes the previous edition published in 2015 under the title, Neutral grounding devices. This edition includes requirements for neutral grounding resistor assemblies; it is intended that future editions will incorporate requirements for other neutral grounding devices as well. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Subcommittee on Ground Fault Circuit Interrupters (Neutral Grounding Assemblies), under the jurisdiction of the Technical Committee on Industrial Products and the Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the Technical Committee. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Standard applies to neutral grounding resistor assemblies that are used to limit the ground fault current or the voltage to ground of an electrical power system when installed in accordance with the Canadian Electrical Code, Part I. 1.2 This Standard applies to neutral grounding resistor assemblies for use in electrical power systems rated 72 kV line to line or less. 1.3 Neutral grounding resistor assemblies may be of an open-type for mounting in other equipment. 1.4 Neutral grounding assemblies may contain components and circuits for sensing and signalling. 1.5 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

CAN/CSA-E60730-2-9:18 (R2023) – Automatic electrical controls — Part 2-9: Particular requirements for temperature sensing controls (Adopted IEC 60730-2-9:2018, edition 4:2015 consolidated with amendment 1:2018, with Canadian deviations)
CDN $944.00 Add to cart -

CSA E62660-1:21 (R2026) – Secondary lithium-ion cells for the propulsion of electric road vehicles – Part 1: Performance testing (Adopted IEC 62660-1:2018, second edition, 2018-12, with Canadian deviations) | Éléments d’accumulateurs lithium-ion pour la propulsion des véhicules routiers électriques – Partie 1 : Essais de performance (norme IEC 62660-1:2018 adoptée, deuxième édition, 2018-12, avec exigences propres au Canada)
CDN $436.00 Add to cart -

IEEE 844.4-2019/CSA C293.4:19 (R2024) – Impedance heating of pipelines and equipment—Application guide for design, installation, testing, commissioning, and maintenance
CDN $174.00 Add to cart -

CAN/CSA-E61965:04 (R2023) – Mechanical safety of cathode ray tubes (Adopted IEC 61965:2003, second edition, 2003-07, with Canadian deviations)
CDN $356.00 Add to cart







