Sky Bear Technical Standards - Home
Search
×
FR

Placeholder headline

This is just a placeholder headline

CSA A123.21:26 – Standard test method for the dynamic wind uplift resistance of membrane-roofing systems

$

236

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-A123.2-03 (R2023) – Asphalt-coated roofing sheets

$

150

BUY NOW

Placeholder headline

This is just a placeholder headline

A123.23-15 (R2025) – Product specification for polymer-modified bitumen sheet, prefabricated and reinforced

$

118

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA A123.24:21 (R2026) – Standard test method for wind resistance of vegetated roof assembly

$

161

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA A123.25:18 (R2023) – Asphalt core boards used in roofing

$

197

BUY NOW

Placeholder headline

This is just a placeholder headline

A123.3-05 (R2020) – Asphalt saturated organic roofing felt

$

150

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-A123.4-04 (R2023) – Asphalt for constructing built-up roof coverings and waterproofing systems

$

150

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA A123.5:16 (R2020) – Asphalt shingles made from glass felt and surfaced with mineral granules

$

197

BUY NOW

CSA C22.2 NO. 23.1:M86 (R2023)

CSA C22.2 NO. 23.1:M86 (R2023) – Electric furnaces in combination with solid fuel fired furnaces

CDN $139.00

Electric furnaces in combination with solid fuel fired furnaces

SKU: 2412325 Categories: ,

Description

Preface This is the first edition of No. 23.1 of a series of Standards issued by Canadian Standards Association under Part II of the Canadian Electrical Code. This Standard applies to central warm air electric resistance type furnaces which are either incorporated in a solid fuel fired furnace or are attached to a solid fuel fired furnace, so as to form a single unit which can be used as an electric furnace, a solid fuel fired furnace, or both simultaneously if so designed. The requirements of this Standard are additional to those of CSA Standard C22.2 No. 23, Electric Central Warm Air Furnaces, and CAN3-B366.1, Solid-Fuel-Fired Appliances for Residential Use. For general information on the Standards of the Canadian Electrical Code, Part II, see the Preface of CSA Standard C22.2 No. 0, General Requirements—Canadian Electrical Code, Part II. This Standard was prepared by a Subcommittee of the Technical Committee on Environmental Products under the jurisdiction of the Standards Steering Committee on Canadian Electrical Code, Part II, and was formally approved by these Committees. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Standard applies to central warm air electric resistance type furnaces which are either incorporated in a solid fuel fired furnace or are attached to a solid fuel fired furnace, so as to form a single unit which can be used as an electric furnace, a solid fuel fired furnace, or both simultaneously if so designed.  1.2 This Standard applies to electric furnaces in combination with solid fuel fired furnaces which are designed for residential use at not more than 150 V to ground and are intended for installation in accordance with the Canadian Electrical Code, Part I.  1.3  This Standard does not apply to electric furnaces which are installed as field “add-ons” or to add-on electric plenum heaters which are covered by CSA Electrical Bulletin No. 1302.  1.4 This Standard does not apply where the combination unit is used in conjunction with or is intended to be added to an oil fired or any other heat energy source of a comfort heating appliance.

Edition

Not found

Published Date

2026-10-05

Status

Not found

Pages

21

Language Detail Icon

English

Format Secure Icon

Secure PDF

Abstract

Preface This is the first edition of No. 23.1 of a series of Standards issued by Canadian Standards Association under Part II of the Canadian Electrical Code. This Standard applies to central warm air electric resistance type furnaces which are either incorporated in a solid fuel fired furnace or are attached to a solid fuel fired furnace, so as to form a single unit which can be used as an electric furnace, a solid fuel fired furnace, or both simultaneously if so designed. The requirements of this Standard are additional to those of CSA Standard C22.2 No. 23, Electric Central Warm Air Furnaces, and CAN3-B366.1, Solid-Fuel-Fired Appliances for Residential Use. For general information on the Standards of the Canadian Electrical Code, Part II, see the Preface of CSA Standard C22.2 No. 0, General Requirements—Canadian Electrical Code, Part II. This Standard was prepared by a Subcommittee of the Technical Committee on Environmental Products under the jurisdiction of the Standards Steering Committee on Canadian Electrical Code, Part II, and was formally approved by these Committees. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Standard applies to central warm air electric resistance type furnaces which are either incorporated in a solid fuel fired furnace or are attached to a solid fuel fired furnace, so as to form a single unit which can be used as an electric furnace, a solid fuel fired furnace, or both simultaneously if so designed.  1.2 This Standard applies to electric furnaces in combination with solid fuel fired furnaces which are designed for residential use at not more than 150 V to ground and are intended for installation in accordance with the Canadian Electrical Code, Part I.  1.3  This Standard does not apply to electric furnaces which are installed as field "add-ons" or to add-on electric plenum heaters which are covered by CSA Electrical Bulletin No. 1302.  1.4 This Standard does not apply where the combination unit is used in conjunction with or is intended to be added to an oil fired or any other heat energy source of a comfort heating appliance.

Previous Editions

Can’t find what you are looking for?

Please contact us at: