ISO 11119:2016
ISO 11119:2016 Gas cylinders – Refillable composite gas cylinders – Design, construction and testing – Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners
CDN $312.00
Description
ISO 11119-4:2016 specifies requirements for composite gas cylinders with load-sharing welded liners between 0,5 l and 150 l water capacity and a maximum test pressure of 450 bar for the storage and conveyance of compressed or liquefied gases.
NOTE 1 1 bar = 105Pa = 105N/m2.
The cylinders are constructed in the form of a welded stainless steel liner or welded ferritic steel liner or welded aluminium alloy liner and overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix to provide longitudinal and circumferential reinforcement.
The cylinders in this part of ISO 11119 are type 3 fully wrapped cylinders with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends.
Cylinders produced in accordance with this part of ISO 11119 have a minimum design life of 15 years. Cylinders with test pressure of up to 60 bar have an unlimited design life.
ISO 11119-4:2016 does not address the design, fitting, and performance of removable protective sleeves.
ISO 11119-4:2016 does not apply to cylinders with seamless liners. For seamless liners, ISO 11119‚Äë2 applies.
NOTE 2 ISO 11623 covers periodic inspection and re-testing of composite cylinders.
Edition
1
Published Date
2016-02-12
Status
PUBLISHED
Pages
40
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
ISO 11119-4:2016 specifies requirements for composite gas cylinders with load-sharing welded liners between 0,5 l and 150 l water capacity and a maximum test pressure of 450 bar for the storage and conveyance of compressed or liquefied gases.
NOTE 1 1 bar = 105Pa = 105N/m2.
The cylinders are constructed in the form of a welded stainless steel liner or welded ferritic steel liner or welded aluminium alloy liner and overwrapped with carbon fibre or aramid fibre or glass fibre (or a mixture thereof) in a matrix to provide longitudinal and circumferential reinforcement.
The cylinders in this part of ISO 11119 are type 3 fully wrapped cylinders with a load-sharing metal liner and composite reinforcement on both the cylindrical portion and the dome ends.
Cylinders produced in accordance with this part of ISO 11119 have a minimum design life of 15 years. Cylinders with test pressure of up to 60 bar have an unlimited design life.
ISO 11119-4:2016 does not address the design, fitting, and performance of removable protective sleeves.
ISO 11119-4:2016 does not apply to cylinders with seamless liners. For seamless liners, ISO 11119‚Äë2 applies.
NOTE 2 ISO 11623 covers periodic inspection and re-testing of composite cylinders.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 17871:2020 Gas cylinders – Quick-release cylinder valves – Specification and type testing
CDN $115.00 Add to cart -
ISO 11119:2020 Gas cylinders – Design, construction and testing of refillable composite gas cylinders and tubes – Part 3: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with non-load-sharing metallic or non-metallic liners or without liners
CDN $312.00 Add to cart -
ISO 9809:2019 Gas cylinders – Design, construction and testing of refillable seamless steel gas cylinders and tubes – Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa
CDN $351.00 Add to cart -
ISO 23088:2020 Gas cylinders – Periodic inspection and testing of welded steel pressure drums – Capacities up to 1 000 l
CDN $233.00 Add to cart
