ISO 1172:2023

Description

This document specifies two calcination methods for the determination of the textile glass and mineral filler content of glass-reinforced plastics:

–¬†¬†¬†¬† Method¬†A: for the determination of the textile glass content when no mineral fillers are present.

–¬†¬†¬†¬† Method¬†B: for the determination of the textile-glass and mineral-filler content when both components are present.

This document is applicable to the following types of material:

–¬†¬†¬†¬† prepregs made from yarns, rovings, tapes or fabrics;

–¬†¬†¬†¬† SMC, BMC and DMC moulding compounds;

–¬†¬†¬†¬† textile-glass-reinforced thermoplastic moulding materials and granules;

–¬†¬†¬†¬† filled or unfilled textile-glass laminates made with thermosetting or thermoplastic resins.

The methods do not apply to the following types of reinforced plastic:

–¬†¬†¬†¬† those containing reinforcements other than textile glass;

–¬†¬†¬†¬† those containing materials which do not completely burn off at the test temperature (for example, those based on silicone resin);

–¬†¬†¬†¬† those containing mineral fillers which degrade at temperatures below the minimum calcination temperature.