Search
×
FR

Placeholder headline

This is just a placeholder headline

API Technical Report TDB-6 Chapter 6 – Density

$

204

BUY NOW

Placeholder headline

This is just a placeholder headline

API STD 560: Fired Heaters for General Refinery Services

$

721

BUY NOW

Placeholder headline

This is just a placeholder headline

API STD 64: Diverter Equipment Systems

$

324

BUY NOW

Placeholder headline

This is just a placeholder headline

API MPMS CH 17.10.1: Refrigerated Light Hydrocarbon Fluids – Measurement of Cargoes on Board LNG Carries

$

417

BUY NOW

Placeholder headline

This is just a placeholder headline

API RP 13B-1: Testing Water-based Drilling Fluids

$

418

BUY NOW

Placeholder headline

This is just a placeholder headline

API Technical Report TDB-12 Chapter 12 – Thermal Conductivity

$

214

BUY NOW

Placeholder headline

This is just a placeholder headline

API 16FI Frac Iron Guidelines and Requirements

$

129

BUY NOW

ISO 13641:2003

ISO 13641:2003 Water quality – Determination of inhibition of gas production of anaerobic bacteria – Part 1: General test

CDN $173.00

SKU: 429805af2b9a Category:

Description

ISO 13641-1:2003 specifies a screening method for assessing the potential toxicity of substances, mixtures, surface waters, groundwaters and wastewaters, effluents, sludges or other environmental samples by determining the production of biogas (carbon dioxide and methane) from the anaerobic digestion of sewage sludge over periods of up to 3 days. The growth rate of anaerobic bacteria is much lower compared with that of aerobic microorganisms. For this reason, the test periods are longer for anaerobic methods than those used for aerobic bacteria.

This method is applicable to substances, soluble or insoluble in water, including volatile chemicals.

Note that special care is necessary with compounds of low water-solubility, and in these cases, other methods might be more suitable.

This method can provide information that is useful in predicting the likely effect of a test material on biogas production in anaerobic digesters. For example, only longer tests, which simulate working digesters more closely can indicate whether adaptation of the microorganisms to the test material can occur or whether compounds likely to be adsorbed onto sludge can build up to a toxic concentration over a longer period than allowed in this test.

Information obtained by ISO 13641-1:2003 can also be helpful in choosing suitable initial mass concentrations for anaerobic biodegradability tests (e.g. ISO 11734). However, ISO 13641-1:2003 using undiluted sludge is less suitable for testing dilute digesting sludge than the method described in ISO 13641-2 where the mass concentrations are a hundredfold more dilute.

Edition

1

Published Date

2003-05-26

Status

PUBLISHED

Pages

14

Language Detail Icon

English

Format Secure Icon

Secure PDF

Abstract

ISO 13641-1:2003 specifies a screening method for assessing the potential toxicity of substances, mixtures, surface waters, groundwaters and wastewaters, effluents, sludges or other environmental samples by determining the production of biogas (carbon dioxide and methane) from the anaerobic digestion of sewage sludge over periods of up to 3 days. The growth rate of anaerobic bacteria is much lower compared with that of aerobic microorganisms. For this reason, the test periods are longer for anaerobic methods than those used for aerobic bacteria.

This method is applicable to substances, soluble or insoluble in water, including volatile chemicals.

Note that special care is necessary with compounds of low water-solubility, and in these cases, other methods might be more suitable.

This method can provide information that is useful in predicting the likely effect of a test material on biogas production in anaerobic digesters. For example, only longer tests, which simulate working digesters more closely can indicate whether adaptation of the microorganisms to the test material can occur or whether compounds likely to be adsorbed onto sludge can build up to a toxic concentration over a longer period than allowed in this test.

Information obtained by ISO 13641-1:2003 can also be helpful in choosing suitable initial mass concentrations for anaerobic biodegradability tests (e.g. ISO 11734). However, ISO 13641-1:2003 using undiluted sludge is less suitable for testing dilute digesting sludge than the method described in ISO 13641-2 where the mass concentrations are a hundredfold more dilute.

Previous Editions

Can’t find what you are looking for?

Please contact us at: