Your cart is currently empty!
ISO 1663:2023
ISO 1663:2023 Rigid cellular plastics – Determination of water vapour transmission properties
CDN $173.00
Description
This document specifies a method of determining the water vapour transmission rate, water vapour permeance, water vapour permeability and water vapour diffusion resistance index for rigid cellular plastics.
This method is applicable for the testing of rigid cellular materials that have thicknesses from 10 mm upwards and can, as an integral part of the material, contain natural skins or adhered facings of some different material.
Three different sets of temperature and humidity conditions are provided, as follows:
a)       38 °C and a relative-humidity gradient across the test specimen of 0 % to 88 %
b)       23 °C and a relative-humidity gradient across the test specimen of 0 % to 85 %
c)        23 °C and a relative-humidity gradient across the test specimen of 0 % to of 50 %
The results obtained by this method are suitable for design purposes and production control, and for inclusion in product specifications.
The method is suitable for materials which have water vapour transmission rates in the range 3 µg/(m2⋅s) to 1 400 µg/(m2⋅s).
Edition
4
Published Date
2023-08-08
Status
PUBLISHED
Pages
16
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
This document specifies a method of determining the water vapour transmission rate, water vapour permeance, water vapour permeability and water vapour diffusion resistance index for rigid cellular plastics.
This method is applicable for the testing of rigid cellular materials that have thicknesses from 10 mm upwards and can, as an integral part of the material, contain natural skins or adhered facings of some different material.
Three different sets of temperature and humidity conditions are provided, as follows:
a)       38 °C and a relative-humidity gradient across the test specimen of 0 % to 88 %
b)       23 °C and a relative-humidity gradient across the test specimen of 0 % to 85 %
c)        23 °C and a relative-humidity gradient across the test specimen of 0 % to of 50 %
The results obtained by this method are suitable for design purposes and production control, and for inclusion in product specifications.
The method is suitable for materials which have water vapour transmission rates in the range 3 µg/(m2⋅s) to 1 400 µg/(m2⋅s).
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 4638:1984 Polymeric materials, cellular flexible – Determination of air flow permeability
CDN $115.00 Add to cart -
ISO 6916:2024 Flexible cellular polymeric materials – Sponge and expanded cellular rubber products – Part 2: Specification for mouldings and extrusions
CDN $233.00 Add to cart -
ISO 3386:1986 Polymeric materials, cellular flexible – Determination of stress-strain characteristics in compression – Part 1: Low-density materials
CDN $76.00 Add to cart -
ISO 3582:2000 Flexible cellular polymeric materials – Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame
CDN $115.00 Add to cart
