ISO 17245:2015
ISO 17245:2015 Corrosion of metals and alloys – Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
CDN $193.00
Description
ISO 17245:2015 specifies the method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids which are under static conditions and exposing them to high temperature in a controlled gas environment to evaluate their corrosion resistance.
Two options are considered: a) using a stagnant inert gas environment, and b) using a flowing reactive gas environment.
ISO 17245:2015 does not cover methods where test pieces are fully or partially embedded in a corrosive powder made up of salt, ash, and/or other solids, or cases in which a surface deposit is applied to the specimens. These methods are covered in ISO 17248 and ISO 17224, respectively.
ISO 17245:2015 is not applicable to the situation of test pieces in relative movement to their surrounding corrosive liquid.
Edition
1
Published Date
2015-04-15
Status
PUBLISHED
Pages
13
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
ISO 17245:2015 specifies the method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids which are under static conditions and exposing them to high temperature in a controlled gas environment to evaluate their corrosion resistance.
Two options are considered: a) using a stagnant inert gas environment, and b) using a flowing reactive gas environment.
ISO 17245:2015 does not cover methods where test pieces are fully or partially embedded in a corrosive powder made up of salt, ash, and/or other solids, or cases in which a surface deposit is applied to the specimens. These methods are covered in ISO 17248 and ISO 17224, respectively.
ISO 17245:2015 is not applicable to the situation of test pieces in relative movement to their surrounding corrosive liquid.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 11782:1998 Corrosion of metals and alloys – Corrosion fatigue testing – Part 1: Cycles to failure testing
CDN $130.00 Add to cart -
ISO 16151:2018 Corrosion of metals and alloys – Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
CDN $261.00 Add to cart -
ISO 18070:2015 Corrosion of metals and alloys – Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
CDN $130.00 Add to cart -
ISO 11844:2020 Corrosion of metals and alloys – Classification of low corrosivity of indoor atmospheres – Part 3: Measurement of environmental parameters affecting indoor corrosivity
CDN $130.00 Add to cart
