ISO 17248:2015
ISO 17248:2015 Corrosion of metals and alloys – Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
CDN $195.00
Description
ISO 17248:2015 specifies the method for high temperature corrosion testing of metallic materials by embedding in a corrosive powder made up of salt, ash, and/or other solids and exposing them to high temperature in a controlled gas environment to evaluate their corrosion resistance.
Two options exist: fully embedding and partially embedding.
Fully embedding is used in cases in which a mass change measurement is required.
Partially embedding is used to investigate three potentially different interaction zones on a single test piece, i.e. the embedded part, the non-embedded part, and the gas/powder interface region. Therefore, gravimetric measurements are not appropriate and metallographic investigations are necessary instead.
ISO 17248:2015 does not cover methods where test pieces are immersed in a liquid or cases in which a surface deposit is applied to the test pieces. These methods are covered in ISO 17245 and ISO 17224, respectively.
Edition
1
Published Date
2015-04-13
Status
PUBLISHED
Pages
14
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
ISO 17248:2015 specifies the method for high temperature corrosion testing of metallic materials by embedding in a corrosive powder made up of salt, ash, and/or other solids and exposing them to high temperature in a controlled gas environment to evaluate their corrosion resistance.
Two options exist: fully embedding and partially embedding.
Fully embedding is used in cases in which a mass change measurement is required.
Partially embedding is used to investigate three potentially different interaction zones on a single test piece, i.e. the embedded part, the non-embedded part, and the gas/powder interface region. Therefore, gravimetric measurements are not appropriate and metallographic investigations are necessary instead.
ISO 17248:2015 does not cover methods where test pieces are immersed in a liquid or cases in which a surface deposit is applied to the test pieces. These methods are covered in ISO 17245 and ISO 17224, respectively.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 11130:2017 Corrosion of metals and alloys – Alternate immersion test in salt solution
CDN $131.00 Add to cart -
ISO 22858:2020 Corrosion of metals and alloys – Electrochemical measurements – Test method for monitoring atmospheric corrosion
CDN $263.00 Add to cart -
ISO 11782:1998 Corrosion of metals and alloys – Corrosion fatigue testing – Part 1: Cycles to failure testing
CDN $131.00 Add to cart -
ISO 6509:2014 Corrosion of metals and alloys – Determination of dezincification resistance of copper alloys with zinc – Part 1: Test method
CDN $131.00 Add to cart
