Search
×
FR

Placeholder headline

This is just a placeholder headline

API Technical Report TDB-6 Chapter 6 – Density

$

204

BUY NOW

Placeholder headline

This is just a placeholder headline

API STD 560: Fired Heaters for General Refinery Services

$

721

BUY NOW

Placeholder headline

This is just a placeholder headline

API STD 64: Diverter Equipment Systems

$

324

BUY NOW

Placeholder headline

This is just a placeholder headline

API MPMS CH 17.10.1: Refrigerated Light Hydrocarbon Fluids – Measurement of Cargoes on Board LNG Carries

$

417

BUY NOW

Placeholder headline

This is just a placeholder headline

API RP 13B-1: Testing Water-based Drilling Fluids

$

418

BUY NOW

Placeholder headline

This is just a placeholder headline

API Technical Report TDB-12 Chapter 12 – Thermal Conductivity

$

214

BUY NOW

Placeholder headline

This is just a placeholder headline

API 16FI Frac Iron Guidelines and Requirements

$

129

BUY NOW

ISO 18749:2004

ISO 18749:2004 Water quality – Adsorption of substances on activated sludge – Batch test using specific analytical methods

CDN $115.00

SKU: 7feae183cbf3 Category:

Description

ISO 18749:2004 specifies a screening test method for the determination of the degree of adsorption of substances on to the activated sludge or primary sludge in a waste water treatment plant.

The conditions described in this International Standard normally correspond to the optimum conditions for the adsorption to occur at the chosen activated-sludge concentration and water hardness during the test period.

The method applies to substances for which an analytical method with sufficient accuracy is available and which, under the conditions of the test and at the test concentration used,

  1. are water-soluble;
  2. or, if only slightly water-soluble, allow sufficiently stable suspensions, dispersions or emulsions to be prepared;
  3. are not significantly removed from the test solution during the test by known abiotic processes such as stripping or foaming;
  4. do not deflocculate activated sludge;
  5. are not readily biodegradable.
Edition

1

Published Date

2004-02-03

Status

PUBLISHED

Pages

10

Language Detail Icon

English

Format Secure Icon

Secure PDF

Abstract

ISO 18749:2004 specifies a screening test method for the determination of the degree of adsorption of substances on to the activated sludge or primary sludge in a waste water treatment plant.

The conditions described in this International Standard normally correspond to the optimum conditions for the adsorption to occur at the chosen activated-sludge concentration and water hardness during the test period.

The method applies to substances for which an analytical method with sufficient accuracy is available and which, under the conditions of the test and at the test concentration used,

  1. are water-soluble;
  2. or, if only slightly water-soluble, allow sufficiently stable suspensions, dispersions or emulsions to be prepared;
  3. are not significantly removed from the test solution during the test by known abiotic processes such as stripping or foaming;
  4. do not deflocculate activated sludge;
  5. are not readily biodegradable.

Previous Editions

Can’t find what you are looking for?

Please contact us at: