
ISO 19017:2015
ISO 19017:2015 Guidance for gamma spectrometry measurement of radioactive waste
CDN $336.00
Description
ISO 19017:2015 is applicable to gamma radiation measurements on radioactive waste.
Radioactive waste can be found in different forms and exhibit a wide range of characteristics, including the following:
– raw or unconditioned waste, including process waste (filters, resins, control rods, scrap, etc.) and waste from dismantling or decommissioning;
– conditioned waste in various forms and matrices (bitumen, cement, hydraulic binder, etc.);
– very low level (VLLW), low level (LLW), intermediate level (ILW) and high level radioactive waste (HLW);
– different package shapes: cylinders, cubes, parallelepipeds, etc.
Guidance is provided in respect of implementation, calibration, and quality control. The diversity of applications and system realizations (ranging from research to industrial systems, from very low level to high level radioactive waste, from small to large volume packages with different shapes, with different performance requirements and allowable measuring time) renders it impossible to provide specific guidance for all instances; the objective of this International Standard is, therefore, to establish a set of guiding principles. Ultimately, implementation is to be performed by suitably qualified and experienced persons and based on a thorough understanding of the influencing factors, contributing variables and performance requirements of the specific measurement application.
This International Standard assumes that the need for the provision of such a system will have been adequately considered and that its application and performance requirements will have been adequately defined through the use of a structured requirements capture process, such as data quality objectives (DQO).
It is noted that, while outside the scope of this International Standard, many of the principles, measurement methods, and recommended practices discussed here are also equally applicable to gamma measurements of items other than radioactive waste (e.g. bulk food, water, free-standing piles of materials) or to measurements made on radioactive materials contained within non-traditional packages (e.g. in transport containers).
Edition
1
Published Date
2015-12-08
Status
PUBLISHED
Pages
48
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
ISO 19017:2015 is applicable to gamma radiation measurements on radioactive waste.
Radioactive waste can be found in different forms and exhibit a wide range of characteristics, including the following:
- raw or unconditioned waste, including process waste (filters, resins, control rods, scrap, etc.) and waste from dismantling or decommissioning;
- conditioned waste in various forms and matrices (bitumen, cement, hydraulic binder, etc.);
- very low level (VLLW), low level (LLW), intermediate level (ILW) and high level radioactive waste (HLW);
- different package shapes: cylinders, cubes, parallelepipeds, etc.
Guidance is provided in respect of implementation, calibration, and quality control. The diversity of applications and system realizations (ranging from research to industrial systems, from very low level to high level radioactive waste, from small to large volume packages with different shapes, with different performance requirements and allowable measuring time) renders it impossible to provide specific guidance for all instances; the objective of this International Standard is, therefore, to establish a set of guiding principles. Ultimately, implementation is to be performed by suitably qualified and experienced persons and based on a thorough understanding of the influencing factors, contributing variables and performance requirements of the specific measurement application.
This International Standard assumes that the need for the provision of such a system will have been adequately considered and that its application and performance requirements will have been adequately defined through the use of a structured requirements capture process, such as data quality objectives (DQO).
It is noted that, while outside the scope of this International Standard, many of the principles, measurement methods, and recommended practices discussed here are also equally applicable to gamma measurements of items other than radioactive waste (e.g. bulk food, water, free-standing piles of materials) or to measurements made on radioactive materials contained within non-traditional packages (e.g. in transport containers).
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

ISO 51940:2022 Guidance for dosimetry for sterile insects release programs
CDN $124.00 Add to cart -

ISO 11665:2019 Measurement of radioactivity in the environment – Air: radon-222 – Part 1: Origins of radon and its short-lived decay products and associated measurement methods
CDN $295.00 Add to cart -

ISO 13167:2023 Water quality – Plutonium, americium, curium and neptunium – Test method using alpha spectrometry
CDN $295.00 Add to cart -

ISO 18589:2019 Measurement of radioactivity in the environment – Soil – Part 6: Gross alpha and gross beta activities – Test method using gas-flow proportional counting
CDN $124.00 Add to cart







