ISO 20264:2019
ISO 20264:2019 Stationary source emissions – Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes
CDN $307.00
Description
This document specifies the use of FTIR spectrometry for determining the concentrations of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes. The method can be employed to continuously analyse sample gas which is extracted from ducts and other sources. A bag sampling method can also be applied, if the compounds do not adsorb on the bag material, and is appropriate in cases where it is difficult or impossible to obtain a direct extractive sample.
The principle, sampling procedure, IR spectral measurement and analysis, calibration, handling interference, QA/QC procedures and some essential performance criteria for measurement of individual VOCs are described in this document.
NOTE 1 The practical minimum detectable concentration of this method depends on the FTIR instrument (i.e. gas cell path length, resolution, instrumental noise and analytical algorithm) used, compounds, and interference specific (e.g. water and CO2).
Edition
1
Published Date
2019-09-03
Status
PUBLISHED
Pages
32
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
This document specifies the use of FTIR spectrometry for determining the concentrations of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes. The method can be employed to continuously analyse sample gas which is extracted from ducts and other sources. A bag sampling method can also be applied, if the compounds do not adsorb on the bag material, and is appropriate in cases where it is difficult or impossible to obtain a direct extractive sample.
The principle, sampling procedure, IR spectral measurement and analysis, calibration, handling interference, QA/QC procedures and some essential performance criteria for measurement of individual VOCs are described in this document.
NOTE 1 The practical minimum detectable concentration of this method depends on the FTIR instrument (i.e. gas cell path length, resolution, instrumental noise and analytical algorithm) used, compounds, and interference specific (e.g. water and CO2).
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 5409:2024 Stationary source emissions – Chemical absorption method for sampling and determining mercury species in flue gas
CDN $349.00 Add to cart -
ISO 16911:2013 Stationary source emissions – Manual and automatic determination of velocity and volume flow rate in ducts – Part 1: Manual reference method
CDN $438.00 Add to cart -
ISO 21741:2020 Stationary source emissions – Sampling and determination of mercury compounds in flue gas using gold amalgamation trap
CDN $307.00 Add to cart -
ISO 19694:2023 Stationary source emissions – Determination of greenhouse gas emissions in energy-intensive industries – Part 3: Cement industry
CDN $393.00 Add to cart
