ISO 20596:2018
ISO 20596:2018 Water quality – Determination of cyclic volatile methylsiloxanes in water – Part 1: Method using purge and trap with gas chromatography-mass spectrometry (GC-MS)
CDN $263.00
Description
This document specifies a method for the quantitative determination of selected cyclic volatile methylsiloxanes (cVMS) in non-filtered water samples by purge and trap extraction with isotope dilution gas chromatography-mass spectrometry (GC-MS).
This method is applicable to the determination of individual cVMS, including:
– octamethylcyclotetrasiloxane (D4);
– decamethylcyclopentasiloxane (D5);
– dodecamethylcyclohexasiloxane (D6);
in surface water, ground water, and wastewater. It can be applied to samples within the concentration range of 0,01 µg/l to 1 µg/l of each of the target compounds. Depending on the matrix, the method may also be applicable to higher concentrations ranging from 1 µg/l to 100 µg/l after suitable dilution of the sample or reduction in sample size.
Edition
1
Published Date
2018-06-12
Status
PUBLISHED
Pages
23
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
This document specifies a method for the quantitative determination of selected cyclic volatile methylsiloxanes (cVMS) in non-filtered water samples by purge and trap extraction with isotope dilution gas chromatography-mass spectrometry (GC-MS).
This method is applicable to the determination of individual cVMS, including:
- octamethylcyclotetrasiloxane (D4);
- decamethylcyclopentasiloxane (D5);
- dodecamethylcyclohexasiloxane (D6);
in surface water, ground water, and wastewater. It can be applied to samples within the concentration range of 0,01 µg/l to 1 µg/l of each of the target compounds. Depending on the matrix, the method may also be applicable to higher concentrations ranging from 1 µg/l to 100 µg/l after suitable dilution of the sample or reduction in sample size.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 21676:2018 Water quality – Determination of the dissolved fraction of selected active pharmaceutical ingredients, transformation products and other organic substances in water and treated waste water – Method using high performance liquid chromatography and mass spectrometric detection (HPLC-MS/MS or -HRMS) after direct injection
CDN $310.00 Add to cart -
ISO 9964:1993 Water quality – Determination of sodium and potassium – Part 1: Determination of sodium by atomic absorption spectrometry
CDN $86.00 Add to cart -
ISO 9174:1998 Water quality – Determination of chromium – Atomic absorption spectrometric methods
CDN $131.00 Add to cart -
ISO 16265:2009 Water quality – Determination of the methylene blue active substances (MBAS) index – Method using continuous flow analysis (CFA)
CDN $131.00 Add to cart
