ISO 2177:2003
ISO 2177:2003 Metallic coatings – Measurement of coating thickness – Coulometric method by anodic dissolution
CDN $173.00
Description
ISO 2177:2002 describes a coulometric method by anodic dissolution for measuring the thickness of metallic coatings. It is only applicable to conductive coatings.
Typical combinations of coatings and substrates that can be tested by this method are given. Other combinations may be tested with electrolytes in current use, or new electrolytes may be developed for them but, in both cases, it is necessary to verify the suitability of the complete system.
ISO 2177:2002 is also applicable to multi-layer systems, e.g Cu-Ni-Cr. It may be used to measure the thickness of coatings applied by various means, if due account is taken of special features such as the presence of an alloy layer. In some cases, the presence and thickness of diffusion layers can also be measured. It can also be used to measure the thickness of coatings on cylindrical specimens and wires.
Edition
3
Published Date
2003-03-19
Status
PUBLISHED
Pages
14
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
ISO 2177:2002 describes a coulometric method by anodic dissolution for measuring the thickness of metallic coatings. It is only applicable to conductive coatings.
Typical combinations of coatings and substrates that can be tested by this method are given. Other combinations may be tested with electrolytes in current use, or new electrolytes may be developed for them but, in both cases, it is necessary to verify the suitability of the complete system.
ISO 2177:2002 is also applicable to multi-layer systems, e.g Cu-Ni-Cr. It may be used to measure the thickness of coatings applied by various means, if due account is taken of special features such as the presence of an alloy layer. In some cases, the presence and thickness of diffusion layers can also be measured. It can also be used to measure the thickness of coatings on cylindrical specimens and wires.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 2063:2019 Thermal spraying – Zinc, aluminium and their alloys – Part 1: Design considerations and quality requirements for corrosion protection systems
CDN $273.00 Add to cart -
ISO 9220:2022 Metallic coatings – Measurement of coating thickness – Scanning electron microscope method
CDN $115.00 Add to cart -
ISO 23363:2020 Electrodeposited coatings and related finishes – Electroless Ni-P-ceramic composite coatings
CDN $115.00 Add to cart -
ISO 10683:2018 Fasteners – Non-electrolytically applied zinc flake coating systems
CDN $273.00 Add to cart
