Your cart is currently empty!

ISO 22478:2006
ISO 22478:2006 Water quality – Determination of certain explosives and related compounds – Method using high-performance liquid chromatography (HPLC) with UV detection
CDN $233.00
Description
ISO 22478:2006 specifies a method for determination of certain explosives, in particular nitrotoluenes, nitroamines and nitrate esters, and related compounds (by-products and degradation products), such as those listed in Table 1, in drinking water, groundwater and surface water.
Depending on the type of sample and the compound to be analysed, the lower limit of the working range for nitroaromatics and nitramines can be assumed to be between 0,1 micrograms/litre and 0,5 micrograms/litre (in some cases, the lower limit may be extended down to 0,05 micrograms/litre). The lower limit of the working range for nitrate esters may be assumed to be higher (0,5 micrograms/litre or more).
Similar compounds, in particular other nitroaromatics, may also be determined by this method, but its applicability will have to be checked in each individual case.
Edition
1
Published Date
2006-02-09
Status
PUBLISHED
Pages
24
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment

Abstract
ISO 22478:2006 specifies a method for determination of certain explosives, in particular nitrotoluenes, nitroamines and nitrate esters, and related compounds (by-products and degradation products), such as those listed in Table 1, in drinking water, groundwater and surface water.
Depending on the type of sample and the compound to be analysed, the lower limit of the working range for nitroaromatics and nitramines can be assumed to be between 0,1 micrograms/litre and 0,5 micrograms/litre (in some cases, the lower limit may be extended down to 0,05 micrograms/litre). The lower limit of the working range for nitrate esters may be assumed to be higher (0,5 micrograms/litre or more).
Similar compounds, in particular other nitroaromatics, may also be determined by this method, but its applicability will have to be checked in each individual case.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 9174:1998 Water quality – Determination of chromium – Atomic absorption spectrometric methods
0 out of 5CDN $115.00 Add to cart -
ISO 25101:2009 Water quality – Determination of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) – Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry
0 out of 5CDN $233.00 Add to cart -
ISO 14911:1998 Water quality – Determination of dissolved Li+, Na+, NH4+, K+, Mn2+, Ca2+, Mg2+, Sr2+ and Ba2+ using ion chromatography – Method for water and waste water
0 out of 5CDN $173.00 Add to cart -
ISO 9964:1993 Water quality – Determination of sodium and potassium – Part 3: Determination of sodium and potassium by flame emission spectrometry
0 out of 5CDN $76.00 Add to cart