ISO 27108:2010
ISO 27108:2010 Water quality – Determination of selected plant treatment agents and biocide products – Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS)
CDN $349.00
Description
ISO 27108:2010 specifies a method for the determination of the dissolved amount of selected plant treatment agents and biocide products in drinking water, ground water and surface water by solid‑phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC‑MS). The limit of determination depends on the matrix, on the specific compound to be analysed and on the sensitivity of the mass spectrometer. For most plant treatment agents and biocides to which ISO 27108:2010 applies, it is at least 0,05 µg/l. Validation data related to a concentration range between 0,05 µg/l and 0,3 µg/l have been demonstrated in an interlaboratory trial.
This method may be applicable to other compounds not explicitly covered by ISO 27108:2010 or to other types of water. However, it is necessary to verify the applicability of this method for these special cases.
Edition
1
Published Date
2010-04-08
Status
PUBLISHED
Pages
37
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
ISO 27108:2010 specifies a method for the determination of the dissolved amount of selected plant treatment agents and biocide products in drinking water, ground water and surface water by solid‑phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC‑MS). The limit of determination depends on the matrix, on the specific compound to be analysed and on the sensitivity of the mass spectrometer. For most plant treatment agents and biocides to which ISO 27108:2010 applies, it is at least 0,05 µg/l. Validation data related to a concentration range between 0,05 µg/l and 0,3 µg/l have been demonstrated in an interlaboratory trial.
This method may be applicable to other compounds not explicitly covered by ISO 27108:2010 or to other types of water. However, it is necessary to verify the applicability of this method for these special cases.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 5815:2019 Water quality – Determination of biochemical oxygen demand after n days (BODn) – Part 1: Dilution and seeding method with allylthiourea addition
CDN $261.00 Add to cart -
ISO 15681:2003 Water quality – Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) – Part 1: Method by flow injection analysis (FIA)
CDN $261.00 Add to cart -
ISO 20236:2024 Water quality – Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion
CDN $261.00 Add to cart -
ISO 15680:2003 Water quality – Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
CDN $307.00 Add to cart
