ISO 5628:2019
ISO 5628:2019 Paper and board – Determination of bending stiffness – General principles for two-point, three-point and four-point methods
CDN $115.00
Description
This document specifies three test methods for determining the bending stiffness of paper and paperboard. The test methods differ in the type of loading mode, thus giving rise to the two-point, three-point and four-point bending test methods.
For paper and paperboard in a low thickness range, the two-point bending method and the three-point bending method are suitable.
For corrugated fibreboard and board with a higher thickness, the four-point bending method is recommended.
The measurement conditions are defined in such a way that the test piece is not subjected to any significant permanent deformation during the test, nor is the range of validity of the formulae for calculating the bending stiffness exceeded.
In these bending tests, the test pieces of paper and board are regarded as “beams” as defined by the science of the strength of materials, see Reference [2].
Edition
3
Published Date
2019-05-14
Status
PUBLISHED
Pages
10
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
This document specifies three test methods for determining the bending stiffness of paper and paperboard. The test methods differ in the type of loading mode, thus giving rise to the two-point, three-point and four-point bending test methods.
For paper and paperboard in a low thickness range, the two-point bending method and the three-point bending method are suitable.
For corrugated fibreboard and board with a higher thickness, the four-point bending method is recommended.
The measurement conditions are defined in such a way that the test piece is not subjected to any significant permanent deformation during the test, nor is the range of validity of the formulae for calculating the bending stiffness exceeded.
In these bending tests, the test pieces of paper and board are regarded as "beams" as defined by the science of the strength of materials, see Reference [2].
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 8784:2014 Pulp, paper and board – Microbiological examination – Part 1: Enumeration of bacteria and bacterial spores based on disintegration
CDN $173.00 Add to cart -
ISO 23885:2022 Paper, board and graphic technology – Determination of the coating strength in the inner fold
CDN $173.00 Add to cart -
ISO 217:2013 Paper – Untrimmed sizes – Designation and tolerances for primary and supplementary ranges, and indication of machine direction
CDN $76.00 Add to cart -
ISO 23404:2020 Information and documentation – Papers and boards used for conservation – Measurement of impact of volatiles on cellulose in paper
CDN $115.00 Add to cart
