
ISO 8296:2003
ISO 8296:2003 Plastics – Film and sheeting – Determination of wetting tension
CDN $85.00
Description
ISO 8296:2003 specifies a method for determining the wetting tension of surfaces of plastic film and sheeting in contact with drops of specific test solutions.
The ability of plastic films to retain inks, coatings, adhesives, etc., is primarily dependent on the character of their surfaces, and can be improved by one of several surface-treatment techniques. These same treatment techniques have been found to increase the wetting tension of a plastic film surface in contact with mixtures of solvents. It is therefore possible to relate the wetting tension of a plastic film surface to its ability to accept and retain inks, coatings, adhesives, etc. The measured wetting tension of a specific film surface can only be related to acceptable ink, coating, or adhesive retention through experience. Wetting tension, in itself, is not a completely acceptable measure of ink, coating or adhesive adhesion.
The test is not applicable when the surface of the material to be tested reacts chemically with the test solution.
Edition
2
Published Date
2003-09-01
Status
PUBLISHED
Pages
3
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
ISO 8296:2003 specifies a method for determining the wetting tension of surfaces of plastic film and sheeting in contact with drops of specific test solutions.
The ability of plastic films to retain inks, coatings, adhesives, etc., is primarily dependent on the character of their surfaces, and can be improved by one of several surface-treatment techniques. These same treatment techniques have been found to increase the wetting tension of a plastic film surface in contact with mixtures of solvents. It is therefore possible to relate the wetting tension of a plastic film surface to its ability to accept and retain inks, coatings, adhesives, etc. The measured wetting tension of a specific film surface can only be related to acceptable ink, coating, or adhesive retention through experience. Wetting tension, in itself, is not a completely acceptable measure of ink, coating or adhesive adhesion.
The test is not applicable when the surface of the material to be tested reacts chemically with the test solution.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

ISO 11963:2019 Plastics – Polycarbonate sheets – Types, dimensions and characteristics
CDN $129.00 Add to cart -

ISO 23559:2011 Plastics – Film and sheeting – Guidance on the testing of thermoplastic films
CDN $129.00 Add to cart -

ISO 15105:2003 Plastics – Film and sheeting – Determination of gas-transmission rate – Part 2: Equal-pressure method
CDN $186.00 Add to cart -

ISO 15106:2015 Plastics – Film and sheeting – Determination of water vapour transmission rate – Part 5: Pressure sensor method
CDN $129.00 Add to cart







