ISO 834:2000
ISO 834:2000 Fire-resistance tests – Elements of building construction – Part 6: Specific requirements for beams
CDN $131.00
Description
This part of ISO 834 specifies the procedures to be followed for determining the fire resistance of beams, when
tested on their own.
Beams are normally tested with their underside and two vertical sides fully exposed to heating. However, when the
exposure is from four sides or less than three sides, appropriate exposure conditions are necessary. Beams which
are part of a floor construction are tested with the floor construction as described in ISO 834-5 and are subject to
evaluation of integrity and insulation.
The application of this test to other untested forms of construction is acceptable when the construction complies
with the direct field of application as given in this part of ISO 834 or when subjected to an extended application
analysis in accordance with ISO/TR 12470. Since ISO/TR 12470 gives only general guidelines, specific extended
application analyses are to be performed only by persons expert in fire-resistant constructions.
General guidance on this test method is given in annex A.
Edition
1
Published Date
2000-08-17
Status
PUBLISHED
Pages
12
Language
English
Format
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
This part of ISO 834 specifies the procedures to be followed for determining the fire resistance of beams, when
tested on their own.
Beams are normally tested with their underside and two vertical sides fully exposed to heating. However, when the
exposure is from four sides or less than three sides, appropriate exposure conditions are necessary. Beams which
are part of a floor construction are tested with the floor construction as described in ISO 834-5 and are subject to
evaluation of integrity and insulation.
The application of this test to other untested forms of construction is acceptable when the construction complies
with the direct field of application as given in this part of ISO 834 or when subjected to an extended application
analysis in accordance with ISO/TR 12470. Since ISO/TR 12470 gives only general guidelines, specific extended
application analyses are to be performed only by persons expert in fire-resistant constructions.
General guidance on this test method is given in annex A.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-
ISO 22553:2019 Paints and varnishes – Electro-deposition coatings – Part 1: Vocabulary
CDN $86.00 Add to cart -
ISO 16840:2006 Wheelchair seating – Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces
CDN $397.00 Add to cart -
ISO 10110:2019 Optics and photonics – Preparation of drawings for optical elements and systems – Part 1: General
CDN $352.00 Add to cart -
ISO 612:1978 Road vehicles – Dimensions of motor vehicles and towed vehicles – Terms and definitions
CDN $195.00 Add to cart
