
CAN/CSA-C22.2 NO. 62841-2-11:17 (R2026)
CAN/CSA-C22.2 NO. 62841-2-11:17 (R2026) – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-11: Particular requirements for hand-held reciprocating saws (Binational standard with UL 62841-2-11)
CDN $260.00
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-11: Particular requirements for hand-held reciprocating saws (Binational standard with UL 62841-2-11)
Description
Preface This is the harmonized CSA Group and UL Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery – Safety – Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws . It is the First edition of CAN/CSA-C22.2 No. 62841-2-11 and the First edition of UL 62841-2-11. This harmonized Standard has been jointly revised on January 10, 2020. For this purpose, CSA Group and UL are issuing revision pages dated January 10, 2020. At the time of publication, IEC Amendment 1:2018 is available from IEC in English only. CSA Group will publish the French version when it becomes available from IEC. This harmonized standard is based on IEC Publication 62841-2-11: First edition Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery – Safety – Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws issued November 2015, as revised by Amendment 1 issued January 2018. IEC 62841-2-11 is copyrighted by the IEC. This harmonized standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the International Harmonization Committee (IHC) for the adoption of the IEC series of standards for Hand-Held, Motor-Operated, and Transportable Tools and Lawn and Garden Machinery UL are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee on Safety of Hand-Held Motor-Operated Electric Tools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope This clause of Part 1 is applicable except as follows: Addition: This part of IEC 62841 applies to hand-held reciprocating saws such as jig saws and sabre saws.
Edition
Not found
Published Date
2026-10-06
Status
Not found
Pages
44
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
Preface This is the harmonized CSA Group and UL Standard for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery – Safety – Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws . It is the First edition of CAN/CSA-C22.2 No. 62841-2-11 and the First edition of UL 62841-2-11. This harmonized Standard has been jointly revised on January 10, 2020. For this purpose, CSA Group and UL are issuing revision pages dated January 10, 2020. At the time of publication, IEC Amendment 1:2018 is available from IEC in English only. CSA Group will publish the French version when it becomes available from IEC. This harmonized standard is based on IEC Publication 62841-2-11: First edition Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery – Safety – Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws issued November 2015, as revised by Amendment 1 issued January 2018. IEC 62841-2-11 is copyrighted by the IEC. This harmonized standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the International Harmonization Committee (IHC) for the adoption of the IEC series of standards for Hand-Held, Motor-Operated, and Transportable Tools and Lawn and Garden Machinery UL are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee on Safety of Hand-Held Motor-Operated Electric Tools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope This clause of Part 1 is applicable except as follows: Addition: This part of IEC 62841 applies to hand-held reciprocating saws such as jig saws and sabre saws.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

CSA C22.3 NO. 5.1:93 (R2022) – Recommended practices for electrical protection – Electric contact between overhead supply and communication lines
CDN $149.00 Add to cart -

CSA TS-117:23 – National technical specification for terminology for the decentralized energy industry in Canada
CDN $79.00 Add to cart -

CAN/CSA-E61965:04 (R2023) – Mechanical safety of cathode ray tubes (Adopted IEC 61965:2003, second edition, 2003-07, with Canadian deviations)
CDN $356.00 Add to cart -

CAN/CSA-E60730-2-9:18 (R2023) – Automatic electrical controls — Part 2-9: Particular requirements for temperature sensing controls (Adopted IEC 60730-2-9:2018, edition 4:2015 consolidated with amendment 1:2018, with Canadian deviations)
CDN $944.00 Add to cart







