
CSA C22.2 NO. 62.1:15 (R2025)
CSA C22.2 NO. 62.1:15 (R2025) – Nonmetallic surface raceways and fittings (Bi-national standard with UL 5A)
CDN $463.00
Nonmetallic surface raceways and fittings (Bi-national standard with UL 5A)
Description
Preface This is the harmonized CSA Group and UL standard for Nonmetallic Surface Raceways and Fittings . It is the second edition of CSA C22.2 No. 62.1, and the fourth edition of UL 5A. This edition of CSA C22.2 No. 62.1 supersedes the previous edition(s) published in 2003. This edition of UL 5A supersedes the previous edition(s) published on July 18, 2003. This harmonized standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the Technical Harmonization Subcommittee 23A SNR Working Group on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee ICCM05-Surface Raceway Systems, under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Scope 1.1 These requirements cover nonmetallic raceways and fittings. These products are for use as surface wiring systems in accordance with the Rules of the Canadian Electrical Code, Part 1, and NFPA 70, National Electrical Code. 1.2 Raceways that are all nonmetallic and of any thickness are intended to enclose circuits operating at potentials not exceeding 600 V between conductors. 1.3 Nonmetallic raceways with metal covers are intended to enclose circuits operating at potentials in accordance with Table 1or Table 1A. 1.4 These requirements do not cover surface metal raceways, cable trays, or wireways.
Edition
Not found
Published Date
2026-10-05
Status
Not found
Pages
46
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
Preface This is the harmonized CSA Group and UL standard for Nonmetallic Surface Raceways and Fittings . It is the second edition of CSA C22.2 No. 62.1, and the fourth edition of UL 5A. This edition of CSA C22.2 No. 62.1 supersedes the previous edition(s) published in 2003. This edition of UL 5A supersedes the previous edition(s) published on July 18, 2003. This harmonized standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the Technical Harmonization Subcommittee 23A SNR Working Group on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee ICCM05-Surface Raceway Systems, under the jurisdiction of the CSA Technical Committee on Wiring Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been approved by the American National Standards Institute (ANSI) as an American National Standard. Scope 1.1 These requirements cover nonmetallic raceways and fittings. These products are for use as surface wiring systems in accordance with the Rules of the Canadian Electrical Code, Part 1, and NFPA 70, National Electrical Code. 1.2 Raceways that are all nonmetallic and of any thickness are intended to enclose circuits operating at potentials not exceeding 600 V between conductors. 1.3 Nonmetallic raceways with metal covers are intended to enclose circuits operating at potentials in accordance with Table 1or Table 1A. 1.4 These requirements do not cover surface metal raceways, cable trays, or wireways.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

CAN/CSA-E61965:04 (R2023) – Mechanical safety of cathode ray tubes (Adopted IEC 61965:2003, second edition, 2003-07, with Canadian deviations)
CDN $356.00 Add to cart -

CSA E60825-1:15 (R2025) – Safety of laser products — Part 1: Equipment classification and requirements (Adopted IEC 60825-1:2014, third edition, 2014-05, with Canadian deviations) | Sécurité des appareils à laser — Partie 1 : Classification des matériels et exigences (norme IEC 60825-1:2014 adoptée, troisième édition, 2014-05, avec exigences propres au Canada)
CDN $488.00 Add to cart -

CSA SPE-3000:19 – Model code for the field evaluation of medical electrical equipment (MEE) and medical electrical systems (MES)
CDN $334.00 Add to cart -

CAN/CSA-E60730-2-9:18 (R2023)/A2:24 – Amendment 2:2024 to CAN/CSA-E60730-2-9:18, Automatic electrical controls — Part 2-9: Particular requirements for temperature sensing controls (Adopted amendment 2:2020 to IEC 60730-2-9:2018)
CDN $19.00 Add to cart







