
CSA C22.2 NO. 62133-1:20 (R2024)
CSA C22.2 NO. 62133-1:20 (R2024) – Secondary cells and batteries containing alkaline or other non-acid electrolytes — Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications — Part 1: Nickel systems (Binational standard with UL 62133-1)
CDN $284.00
Secondary cells and batteries containing alkaline or other non-acid electrolytes — Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications — Part 1: Nickel systems (Binational standard with UL 62133-1)
Description
Preface This is the harmonized CSA Group and UL standard for Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Sealed Secondary Cells , and for Batteries Made from Them, for Use in Portable Applications – Part 1: Nickel Systems . It is the first edition of CSA C22.2 No. 62133-1, and the first edition of UL 62133-1. This edition of CSA C22.2 No. 62133-1 replaces CAN/CSA-C22.2 No. 62133:17 (adopted IEC 62133:2012), Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications. This edition of UL 62133-1 replaces the second edition UL 62133, Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications, published September 5, 2017. This harmonized standard is based on IEC Publication 62133-1: first edition, Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from Them, for Use in Portable Applications – Part 1: Nickel Systems, issued February 2017. IEC 62133-1 is copyrighted by the IEC. This harmonized standard is based on IEC Publication 62133-1: first edition, Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from Them, for Use in Portable Applications – Part 1: Nickel Systems, issued February 2017. IEC 62133-1 is copyrighted by the IEC. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee on Batteries and Battery Systems, under the jurisdiction of the CSA Technical Committee on General Requirements, CE Code, Part II and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope This part of IEC 62133 specifies requirements and tests for the safe operation of portable sealed secondary nickel cells and batteries containing alkaline electrolyte, under intended use and reasonably foreseeable misuse. 1DV.1 D1 Modification to add the following paragraph and note to Clause 1: This standard is not, by itself, generally suitable for the evaluation of the safety of end-products, as it lacks specific requirements regarding charging, the effect of normal loads, abnormal conditions that should be considered, and the physical and electromagnetic stresses encountered in the anticipated environment of the end-product. NOTE Battery packs with additional features or circuitry, including integral circuitry that facilitates charging, are considered to be end-products. 1DV.2 DR Modification to add the following paragraph to Clause 1 (Canada only): This standard deals with the covered components used in accordance with CAN/CSAC22.2 No. 0.
Edition
Not found
Published Date
2026-10-06
Status
Not found
Pages
41
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
Preface This is the harmonized CSA Group and UL standard for Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Sealed Secondary Cells , and for Batteries Made from Them, for Use in Portable Applications – Part 1: Nickel Systems . It is the first edition of CSA C22.2 No. 62133-1, and the first edition of UL 62133-1. This edition of CSA C22.2 No. 62133-1 replaces CAN/CSA-C22.2 No. 62133:17 (adopted IEC 62133:2012), Secondary cells and batteries containing alkaline or other non-acid electrolytes – Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications. This edition of UL 62133-1 replaces the second edition UL 62133, Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications, published September 5, 2017. This harmonized standard is based on IEC Publication 62133-1: first edition, Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from Them, for Use in Portable Applications – Part 1: Nickel Systems, issued February 2017. IEC 62133-1 is copyrighted by the IEC. This harmonized standard is based on IEC Publication 62133-1: first edition, Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes – Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made from Them, for Use in Portable Applications – Part 1: Nickel Systems, issued February 2017. IEC 62133-1 is copyrighted by the IEC. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee on Batteries and Battery Systems, under the jurisdiction of the CSA Technical Committee on General Requirements, CE Code, Part II and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope This part of IEC 62133 specifies requirements and tests for the safe operation of portable sealed secondary nickel cells and batteries containing alkaline electrolyte, under intended use and reasonably foreseeable misuse. 1DV.1 D1 Modification to add the following paragraph and note to Clause 1: This standard is not, by itself, generally suitable for the evaluation of the safety of end-products, as it lacks specific requirements regarding charging, the effect of normal loads, abnormal conditions that should be considered, and the physical and electromagnetic stresses encountered in the anticipated environment of the end-product. NOTE Battery packs with additional features or circuitry, including integral circuitry that facilitates charging, are considered to be end-products. 1DV.2 DR Modification to add the following paragraph to Clause 1 (Canada only): This standard deals with the covered components used in accordance with CAN/CSAC22.2 No. 0.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

CSA SPE-3000:19 – Model code for the field evaluation of medical electrical equipment (MEE) and medical electrical systems (MES)
CDN $334.00 Add to cart -

CSA E61347-2-3:23 – Lamp control gear — Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps (Adopted IEC 61347-2-3:2011, edition 2:2011 consolidated with amendment 1:2016, with Canadian deviations) | Appareillages de lampes — Partie 2-3 : Exigences particulières pour les appareillages électroniques alimentés en courant alternatif et/ou en courant continu pour lampes fluorescentes (norme IEC 61347-2-3:2011 adoptée, édition 2:2011 consolidée par l’amendement 1:2016, avec exigences propres au Canada)
CDN $620.00 Add to cart -

CSA G164:26 – Galvanizing of irregularly shaped articles
CDN $142.00 Add to cart -

CAN/CSA-E61965:04 (R2023) – Mechanical safety of cathode ray tubes (Adopted IEC 61965:2003, second edition, 2003-07, with Canadian deviations)
CDN $356.00 Add to cart







