
CSA C22.2 NO. 62986:21 (R2026)
CSA C22.2 NO. 62986:21 (R2026) – Plugs, socket-outlets and couplers with arcuate contacts (Adopted IEC 62986:2017, first edition, 2017-09, with Canadian deviations)
CDN $696.00
Plugs, socket-outlets and couplers with arcuate contacts (Adopted IEC 62986:2017, first edition, 2017-09, with Canadian deviations)
Description
CSA Preface This is the first edition of CSA C22.2 No. 62986, Plugs, socket-outlets and couplers with arcuate contacts , which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 62986 (first edition, 2017-09). It is one in a series of Standards issued by CSA Group under Part II of the Canadian Electrical Code. At the time of publication, IEC 62986:2017 is available from IEC in English only. CSA Group will publish the French version when it becomes available from IEC. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope This document sets the general and dimensional interchangeability requirements for plugs, socket-outlets, connectors and appliance inlets with arcuate contacts of standardized configurations (hereinafter referred to as accessories), with a rated operating voltage not exceeding 600 V AC at a frequency of 50 Hz and 60 Hz and with rated currents of 20 A and 30 A, primarily intended for commercial use indoors, in conditions where the presence of water is negligible. This document applies to accessories for use when the ambient temperature is normally within the range of –25 °C to +40 °C. These accessories are intended to be connected to cables of copper or copper alloy only. Interchangeability requirements are defined for IP20 accessories. NOTE The conditions of use indoors are based on the limitations given by IEC 60364-5-51:2005, Table 51A, AD1. Socket-outlets or appliance inlets incorporated in or fixed to electrical equipment are within the scope of this document.
Edition
Not found
Published Date
2026-10-05
Status
Not found
Pages
114
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
CSA Preface This is the first edition of CSA C22.2 No. 62986, Plugs, socket-outlets and couplers with arcuate contacts , which is an adoption, with Canadian deviations, of the identically titled IEC (International Electrotechnical Commission) Standard 62986 (first edition, 2017-09). It is one in a series of Standards issued by CSA Group under Part II of the Canadian Electrical Code. At the time of publication, IEC 62986:2017 is available from IEC in English only. CSA Group will publish the French version when it becomes available from IEC. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope This document sets the general and dimensional interchangeability requirements for plugs, socket-outlets, connectors and appliance inlets with arcuate contacts of standardized configurations (hereinafter referred to as accessories), with a rated operating voltage not exceeding 600 V AC at a frequency of 50 Hz and 60 Hz and with rated currents of 20 A and 30 A, primarily intended for commercial use indoors, in conditions where the presence of water is negligible. This document applies to accessories for use when the ambient temperature is normally within the range of –25 °C to +40 °C. These accessories are intended to be connected to cables of copper or copper alloy only. Interchangeability requirements are defined for IP20 accessories. NOTE The conditions of use indoors are based on the limitations given by IEC 60364-5-51:2005, Table 51A, AD1. Socket-outlets or appliance inlets incorporated in or fixed to electrical equipment are within the scope of this document.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

IEEE 844.2-2017/CSA C293.2:17 (R2022) – Skin effect trace heating of pipelines, vessels, equipment, and structures—Application guide for design, installation, testing, commissioning, and maintenance
CDN $158.00 Add to cart -

IEEE 844.3-2019/CSA C22.2 NO. 293.3:19 (R2024) – Impedance heating of pipelines and equipment—General, testing, marking, and documentation requirements
CDN $174.00 Add to cart -

CAN/CSA-E61965:04 (R2023) – Mechanical safety of cathode ray tubes (Adopted IEC 61965:2003, second edition, 2003-07, with Canadian deviations)
CDN $356.00 Add to cart -

CSA E60825-1:15 (R2025) – Safety of laser products — Part 1: Equipment classification and requirements (Adopted IEC 60825-1:2014, third edition, 2014-05, with Canadian deviations) | Sécurité des appareils à laser — Partie 1 : Classification des matériels et exigences (norme IEC 60825-1:2014 adoptée, troisième édition, 2014-05, avec exigences propres au Canada)
CDN $488.00 Add to cart







