
CSA C374:11 (R2021)
CSA C374:11 (R2021) – Energy performance of hot tubs and spas
CDN $219.00
Energy performance of hot tubs and spas
Description
Preface This is the first edition of CSA C374, Energy performance of hot tubs and spas. This Standard provides a test method and energy performance requirements for hot tubs and spas. CSA is indebted to the California Energy Commission (CEC) for the use of their document Appliance Efficiency Regulations – California Code of Regulations, Title 20, August 2009, in the development of this Standard. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 General This Standard applies to electric hot tubs/spas that are factory-built, self-contained packaged units supplied with equipment for heating and circulating water. These units are connected to an electrical supply circuit of 250 V or less (i.e., 125 V maximum to ground). This Standard specifies test procedures, test conditions, and performance requirements for standby energy performance and markings of electric hot tubs/spas. This Standard does not include exercise or swim spas. 1.2 Mandatory language In CSA standards, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 1.3 Units of measurement The values given in SI units are the units of record for the purposes of this Standard. Where values are given in parentheses, they are for information and comparison only.
Edition
Not found
Published Date
2026-10-05
Status
Not found
Pages
21
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
Preface This is the first edition of CSA C374, Energy performance of hot tubs and spas. This Standard provides a test method and energy performance requirements for hot tubs and spas. CSA is indebted to the California Energy Commission (CEC) for the use of their document Appliance Efficiency Regulations - California Code of Regulations, Title 20, August 2009, in the development of this Standard. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 General This Standard applies to electric hot tubs/spas that are factory-built, self-contained packaged units supplied with equipment for heating and circulating water. These units are connected to an electrical supply circuit of 250 V or less (i.e., 125 V maximum to ground). This Standard specifies test procedures, test conditions, and performance requirements for standby energy performance and markings of electric hot tubs/spas. This Standard does not include exercise or swim spas. 1.2 Mandatory language In CSA standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 1.3 Units of measurement The values given in SI units are the units of record for the purposes of this Standard. Where values are given in parentheses, they are for information and comparison only.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

CSA W218:23 – Specifications for natural asset inventories
CDN $79.00 Add to cart -

CSA W219:23 – Performance criteria for the analyses of environmental DNA by targeted quantitative polymerase chain reaction
CDN $79.00 Add to cart -

CSA W212:25 – Temporary flood protection barrier performance testing for Canadian climates
CDN $103.00 Add to cart -

CSA Z5040:26 – GHG emissions, energy, and water reporting for existing buildings
CDN $299.00 Add to cart







