
CSA M427:M91 (R2026)
CSA M427:M91 (R2026) – Fire-performance and antistatic requirements for ventilation materials
CDN $79.00
Fire-performance and antistatic requirements for ventilation materials
Description
Preface This is the first edition of CSA Standard CAN/CSA-M42 7, Fire-Performance and Anristutic Requirements for Ventilation Materials . It was developed because a fire-resistance test for ventilation ducts has become necessary in order to permit evaluation of ducts and thus prevent fire spread. A fire in an underground mine can be very dangerous because of limited means of escape. Ventilation tubing and brattice cloth are often made of polymeric materials that have the potential to spread to a fire once ignited. This standard outlines the test methods necessary to ensure the safe use of ventilation tubing materials by determining their flammability and antistatic requirements for underground mines. Scope 1.1 This Standard specifies the fire-performance and antistatic requirements for new (unused) ventilation materials for use in underground mines. 1.2 Ventilation materials can be divided into two categories: rigid tubing and flexible sheeting. (The latter can be either used in the form of hanging sheets or made into tubing.) The physical differences between these two categories require that the tests and requirements be slightly different. The intent of this standard, however, is to ensure that the fire-performance and antistatic characteristics are evaluated in an equivalent manner. 1.3 This Standard covers ventilation material of the following types: (a) Type VH-AS, intended for either vertical or horizontal applications in explosive atmospheres; (b) Type VH, intended for either vertical or horizontal applications in nonexplosive atmospheres; (c) Type H-AS, intended for horizontal or near-horizontal applications in explosive atmospheres; (d) Type H, intended for horizontal or near-horizontal applications in nonexplosive atmospheres. Notes: (1) The letters V, H, and AS stand for Vertical, Horizontal, and Antistatic respectively. (2) Vertical applications are the most severe because of the possibility of a “chimney effect” accelerating the spread of the fire. 1.4 This Standard does not address the products of combustion or of thermal degradation from ventilation materials subjected to fire or heating, except as noted in Clause 5. Note: While the object of this Standard is to establish a reasonable level of fire-performance for ventilation materials, it is recognized that any ventilation material may burn under conditions different from those described in this Standard.
Edition
Not found
Published Date
2026-10-05
Status
Not found
Pages
23
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
Preface This is the first edition of CSA Standard CAN/CSA-M42 7, Fire-Performance and Anristutic Requirements for Ventilation Materials . It was developed because a fire-resistance test for ventilation ducts has become necessary in order to permit evaluation of ducts and thus prevent fire spread. A fire in an underground mine can be very dangerous because of limited means of escape. Ventilation tubing and brattice cloth are often made of polymeric materials that have the potential to spread to a fire once ignited. This standard outlines the test methods necessary to ensure the safe use of ventilation tubing materials by determining their flammability and antistatic requirements for underground mines. Scope 1.1 This Standard specifies the fire-performance and antistatic requirements for new (unused) ventilation materials for use in underground mines. 1.2 Ventilation materials can be divided into two categories: rigid tubing and flexible sheeting. (The latter can be either used in the form of hanging sheets or made into tubing.) The physical differences between these two categories require that the tests and requirements be slightly different. The intent of this standard, however, is to ensure that the fire-performance and antistatic characteristics are evaluated in an equivalent manner. 1.3 This Standard covers ventilation material of the following types: (a) Type VH-AS, intended for either vertical or horizontal applications in explosive atmospheres; (b) Type VH, intended for either vertical or horizontal applications in nonexplosive atmospheres; (c) Type H-AS, intended for horizontal or near-horizontal applications in explosive atmospheres; (d) Type H, intended for horizontal or near-horizontal applications in nonexplosive atmospheres. Notes: (1) The letters V, H, and AS stand for Vertical, Horizontal, and Antistatic respectively. (2) Vertical applications are the most severe because of the possibility of a "chimney effect" accelerating the spread of the fire. 1.4 This Standard does not address the products of combustion or of thermal degradation from ventilation materials subjected to fire or heating, except as noted in Clause 5. Note: While the object of this Standard is to establish a reasonable level of fire-performance for ventilation materials, it is recognized that any ventilation material may burn under conditions different from those described in this Standard.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

Z94.1-15 (R2025) – Industrial protective headwear – Performance, selection, care, and use
CDN $158.00 Add to cart -

CSA Z462:24 – Workplace electrical safety
CDN $315.00 Add to cart -

CSA Z301:24 – Equity, diversity, inclusion, and accessibility in apprenticeship programs
CDN $236.00 Add to cart -

CAN/CSA-Z5100-17 (R2022) – Cellulose nanomaterials – Test methods for characterization
CDN $197.00 Add to cart







