
CSA Z1005.1:21
CSA Z1005.1:21 – Implementation Guideline for CSA Z1005, Workplace incident investigation
CDN $221.00
Implementation Guideline for CSA Z1005, Workplace incident investigation
Description
Preface This is the first edition of CSA Z1005.1, Implementation Guideline for CSA Z1005, Workplace incident investigation. The primary objective of this Guideline is to provide small, medium, and large organizations with guidance on how to best apply CSA Z1005. CSA Group acknowledges that the development of this Standard was made possible, in part, by the financial support of the Canadian Association of Administrators of Labour Law — Occupational Safety and Health (CAALL-OSH), including Provincial and Territorial Governments, as well as the Government of Canada. CSA Group is solely responsible for the content of this Standard, and CSA Group and the funding bodies disclaim any liability in connection with the use of the information contained herein. This Guideline was prepared by the Technical Committee on Incident Investigation and Prevention under the jurisdiction of the Strategic Steering Committee on Occupational Health and Safety, and has been formally approved by the Technical Committee. This Guideline has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 Inclusions This Standard specifies the requirements to address occupational health and safety (OHS) incident investigation and prevention program (IIPP). This Standard can be applied to inform investigations by organizations in any type of industry of any size. 1.2 Exemptions This Standard does not specify requirements for criminal or regulatory enforcement investigations. Notes: 1) The investigation principles of this Standard can be applied to non-OHS investigations, such as environmental incidents. 2) Some investigations can involve, or evolve into, a criminal or regulatory investigation. Organizations need to plan for this possibility. 1.3 Terminology In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
Edition
Not found
Published Date
2026-10-05
Status
Not found
Pages
83
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
Preface This is the first edition of CSA Z1005.1, Implementation Guideline for CSA Z1005, Workplace incident investigation. The primary objective of this Guideline is to provide small, medium, and large organizations with guidance on how to best apply CSA Z1005. CSA Group acknowledges that the development of this Standard was made possible, in part, by the financial support of the Canadian Association of Administrators of Labour Law — Occupational Safety and Health (CAALL-OSH), including Provincial and Territorial Governments, as well as the Government of Canada. CSA Group is solely responsible for the content of this Standard, and CSA Group and the funding bodies disclaim any liability in connection with the use of the information contained herein. This Guideline was prepared by the Technical Committee on Incident Investigation and Prevention under the jurisdiction of the Strategic Steering Committee on Occupational Health and Safety, and has been formally approved by the Technical Committee. This Guideline has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 Inclusions This Standard specifies the requirements to address occupational health and safety (OHS) incident investigation and prevention program (IIPP). This Standard can be applied to inform investigations by organizations in any type of industry of any size. 1.2 Exemptions This Standard does not specify requirements for criminal or regulatory enforcement investigations. Notes: 1) The investigation principles of this Standard can be applied to non-OHS investigations, such as environmental incidents. 2) Some investigations can involve, or evolve into, a criminal or regulatory investigation. Organizations need to plan for this possibility. 1.3 Terminology In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the Standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

CSA Z94.2:26 – Hearing protection devices – Performance, selection, care, and use
CDN $244.00 Add to cart -

CAN/CSA-Z94.4-18 (R2023) – Selection, use, and care of respirators
CDN $299.00 Add to cart -

CSA Z431:12 (R2021) – Basic and safety principles for man-machine interface, marking and identification – Coding principles for indicators and actuators (Adopted IEC 60073:2002, sixth edition, 2002-05, with Canadian deviations) | Principes fondamentaux et de sécurité pour l’interface homme-machine, le marquage et l’identification – Principes de codage pour les indicateurs et les organes de commande (norme IEC 60073:2002 adoptée, sixième édition, 2002-05, avec exigences propres au Canada)
CDN $307.00 Add to cart -

CAN/CSA-Z5200-17 (R2022) – Cellulose nanomaterials – Blank detail specification
CDN $118.00 Add to cart







