Sky Bear Technical Standards - Home
REGISTER

FR
Search Icon
Search
×
FR

Placeholder headline

This is just a placeholder headline

B51-14 (R2019) – Boiler, pressure vessel, and pressure piping code

$

362

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-6:22 – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-6: Particular requirements for hand-held hammers (Binational standard with UL 62841-2-6)

$

598

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-6:22/A1:24 – Amendment 1:2024 to CSA C22.2 NO. 62841-2-6:22, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-6: Particular requirements for hand-held hammers (Binational standard with UL 62841-2-6)

$

111

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-5:16 (R2026) – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-5: Particular requirements for hand-held circular saws (Bi-national standard with UL 62841-2-5)

$

480

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-5:16 (R2026)/A1:26 – Amendment 1:2026 to CAN/CSA-C22.2 NO. 62841-2-5:16, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-5: Particular requirements for hand-held circular saws (Bi-national standard with UL 62841-2-5)

$

48

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 No. 62841-2-4:15/A1:26 – Amendment 1:2026 (IDT) to CAN/CSA-C22.2 No. 62841-2-4:15, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (Bi-national standard with UL 62841-2-4)

$

48

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-4:15 (R2025) – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (Bi-national standard with UL 62841-2-4)

$

167

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-3:21/A1:26 – Amendment 1:2026 to CSA C22.2 No. 62841-2-3:21, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-3: Particular requirements for handheld grinders, disc-type polishers and disc-type sanders (Binational standard with UL 62841-2-3)

$

520

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-23:25 – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-23: Particular requirements for hand-held die grinders and small rotary tools (Binational standard with IEC 62841-2-23)

$

394

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-21:18/A1:26 – Amendment 1:2026 to CAN/CSA-C22.2 No. 62841-2-21:18, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-21: Particular requirement for hand-held drain cleaners (Adopted amendment 1:2024 to IEC 62841-2-21)

$

21

BUY NOW

Awaiting product image

ISO 11124-7:2025

ISO 11124-7:2025 Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 7: High chromium white cast iron grit

CDN $82.00

This publication was last reviewed and confirmed in 2025.

Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives — Part 7: High chromium white cast iron grit

SKU: 0814f07ea991 Categories: , , ,

Description

This document specifies requirements for high chromium white cast iron grit, as supplied for blast-cleaning processes. It specifies ranges of particle sizes, together with corresponding grade designations. Values are specified for hardness, density, defect/structural requirements, metallographic structure and chemical composition.

The requirements specified in this document apply to abrasives supplied in the new condition only. They do not apply to abrasives either during or after use.

High chromium white cast iron grits are used in both static and site blasting equipment. They are most often selected where there is a possibility for the recovery and re-use of the abrasive.

NOTE 1 Although this document has been developed for preparation of steelwork, these materials are predominantly used for non-ferrous substrates. The properties specified will generally be appropriate for use when preparing other material surfaces, or components, using blast-cleaning techniques, and can be used for applications where no subsequent coating is applied.

NOTE 2 Whenever dissimilar metals are used together, galvanic corrosion can occur.

Edition

1

Published Date

2026-06-18

Status

PUBLISHED

Pages

4

Language Detail Icon

English

Format Secure Icon

Secure PDF

Secure – PDF details

  • Save your file locally or view it via a web viewer
  • Viewing permissions are restricted exclusively to the purchaser
  • Device limits - 3
  • Printing – Enabled only to print (1) copy

See more about our Environmental Commitment

Close

Abstract

This document specifies requirements for high chromium white cast iron grit, as supplied for blast-cleaning processes. It specifies ranges of particle sizes, together with corresponding grade designations. Values are specified for hardness, density, defect/structural requirements, metallographic structure and chemical composition.

The requirements specified in this document apply to abrasives supplied in the new condition only. They do not apply to abrasives either during or after use.

High chromium white cast iron grits are used in both static and site blasting equipment. They are most often selected where there is a possibility for the recovery and re-use of the abrasive.

NOTE 1 Although this document has been developed for preparation of steelwork, these materials are predominantly used for non-ferrous substrates. The properties specified will generally be appropriate for use when preparing other material surfaces, or components, using blast-cleaning techniques, and can be used for applications where no subsequent coating is applied.

NOTE 2 Whenever dissimilar metals are used together, galvanic corrosion can occur.

Previous Editions

Can’t find what you are looking for?

Please contact us at:
Contact Image

[email protected]

Related Documents

Need Help?

Customer Care

+1 587-570-4151

[email protected]

Need Help?

Customer Care

+1 234 567 8910

[email protected]

[email protected]

+1 587-570-4151

Quick Links

© 2026 Sky Bear Technical Standards Inc. All rights reserved.

Proudly Canadian