Sky Bear Technical Standards - Home
REGISTER

FR
Search Icon
Search
×
FR

Placeholder headline

This is just a placeholder headline

B51-14 (R2019) – Boiler, pressure vessel, and pressure piping code

$

362

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-6:22 – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-6: Particular requirements for hand-held hammers (Binational standard with UL 62841-2-6)

$

598

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-6:22/A1:24 – Amendment 1:2024 to CSA C22.2 NO. 62841-2-6:22, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-6: Particular requirements for hand-held hammers (Binational standard with UL 62841-2-6)

$

111

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-5:16 (R2026) – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-5: Particular requirements for hand-held circular saws (Bi-national standard with UL 62841-2-5)

$

480

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-5:16 (R2026)/A1:26 – Amendment 1:2026 to CAN/CSA-C22.2 NO. 62841-2-5:16, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-5: Particular requirements for hand-held circular saws (Bi-national standard with UL 62841-2-5)

$

48

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 No. 62841-2-4:15/A1:26 – Amendment 1:2026 (IDT) to CAN/CSA-C22.2 No. 62841-2-4:15, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (Bi-national standard with UL 62841-2-4)

$

48

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-4:15 (R2025) – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type (Bi-national standard with UL 62841-2-4)

$

167

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-3:21/A1:26 – Amendment 1:2026 to CSA C22.2 No. 62841-2-3:21, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-3: Particular requirements for handheld grinders, disc-type polishers and disc-type sanders (Binational standard with UL 62841-2-3)

$

520

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA C22.2 NO. 62841-2-23:25 – Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery — Safety — Part 2-23: Particular requirements for hand-held die grinders and small rotary tools (Binational standard with IEC 62841-2-23)

$

394

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-C22.2 NO. 62841-2-21:18/A1:26 – Amendment 1:2026 to CAN/CSA-C22.2 No. 62841-2-21:18, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-21: Particular requirement for hand-held drain cleaners (Adopted amendment 1:2024 to IEC 62841-2-21)

$

21

BUY NOW

Awaiting product image

ISO 17078-2:2026

ISO 17078-2:2026 Oil and gas industries including lower carbon energy — Drilling, production and injection equipment — Part 2: Flow-control devices for side-pocket mandrels

CDN $85.00

This publication was last reviewed and confirmed in 2026.

Oil and gas industries including lower carbon energy — Drilling, production and injection equipment — Part 2: Flow-control devices for side-pocket mandrels

SKU: f7fdd3944dd4 Category:

Description

This document provides requirements for subsurface flow-control devices used in side-pocket mandrels intended for use in the worldwide petroleum and natural gas industry. This document addresses injection-pressure-operated (IPO), production-pressure-operated (PPO), pilot, orifice, tubing-retrievable, and dummy flow-control devices. It includes requirements for selecting, designing, manufacturing, quality control, testing, and preparation for the shipping of flow-control devices. Additionally, it includes information regarding performance testing and calibration requirements.

The installation and retrieval of flow-control devices is outside the scope of this document. Additionally, this document is not applicable to flow-control devices with concentric axes.

This document does not include requirements for side-pocket mandrels, running, pulling, kick-over tools, or latches. Reconditioning of used flow-control devices is outside the scope of this document.

This document supplements API Spec 19G2, 2nd edition (2020), the requirements of which are applicable with the exceptions specified in this document.

Edition

2

Published Date

2026-09-16

Status

PUBLISHED

Pages

4

Language Detail Icon

English

Format Secure Icon

Secure PDF

Secure – PDF details

  • Save your file locally or view it via a web viewer
  • Viewing permissions are restricted exclusively to the purchaser
  • Device limits - 3
  • Printing – Enabled only to print (1) copy

See more about our Environmental Commitment

Close

Abstract

This document provides requirements for subsurface flow-control devices used in side-pocket mandrels intended for use in the worldwide petroleum and natural gas industry. This document addresses injection-pressure-operated (IPO), production-pressure-operated (PPO), pilot, orifice, tubing-retrievable, and dummy flow-control devices. It includes requirements for selecting, designing, manufacturing, quality control, testing, and preparation for the shipping of flow-control devices. Additionally, it includes information regarding performance testing and calibration requirements.

The installation and retrieval of flow-control devices is outside the scope of this document. Additionally, this document is not applicable to flow-control devices with concentric axes.

This document does not include requirements for side-pocket mandrels, running, pulling, kick-over tools, or latches. Reconditioning of used flow-control devices is outside the scope of this document.

This document supplements API Spec 19G2, 2nd edition (2020), the requirements of which are applicable with the exceptions specified in this document.

Previous Editions

Can’t find what you are looking for?

Please contact us at:
Contact Image

[email protected]

Related Documents

Need Help?

Customer Care

+1 587-570-4151

[email protected]

Need Help?

Customer Care

+1 234 567 8910

[email protected]

[email protected]

+1 587-570-4151

Quick Links

© 2026 Sky Bear Technical Standards Inc. All rights reserved.

Proudly Canadian