
C22.2 NO. 89-15 (R2025)
C22.2 NO. 89-15 (R2025) – Swimming-pool luminaires, submersible luminaires, and accessories
CDN $134.00
Swimming-pool luminaires, submersible luminaires, and accessories
Description
Preface This is the third edition of CSA C22.2 No. 89, Swimming-pool luminaires, submersible luminaires, and accessories, part of the Canadian Electrical Code, Part II. It supersedes the previous editions published in 1976 and 1968. This Standard also replaces the following Technical Information Letter (TIL), for products covered in this Standard: CSA TIL No. B-44, Permanently Connected, Cord-Connected and Direct Plug-In Lighting Systems Incorporating Nicheless Luminaire Assemblies that Employ Extra-Low Voltage Incandescent Lamps for Use in Pools. For general information on the Standards of the Canadian Electrical Code, Part II, see the Preface of CAN/CSA-C22.2 No. 0, General requirements — Canadian Electrical Code, Part II. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Integrated Committee on Lighting Products, under the jurisdiction of the Technical Committee on Consumer and Commercial Products and the Strategic Steering Committee on Requirements for Electrical Safety. Scope 1.1 This Standard applies to submersible lighting systems and associated components for installation in accordance with the Canadian Electrical Code, Part I that are: a) permanently connected to branch circuit; or b) portable type, cord-connected or direct plug-in type. 1.2 This Standard covers submersible lighting systems for connection to a supply circuit of not more than 150 V, intended for swimming pools, spas, hot tubs, fountains, decorative pools, waterfalls, and similar submersible applications. 1.3 This Standard applies to the following associated components: a) isolating-type power supply; b) double insulated power supply; c) one or more luminaire assemblies of the incandescent, fluorescent, CFL, HID, or any LED technologytype; d) flexible cable and associated connectors intended for use in the secondary circuit; e) junction and deck boxes for swimming pool luminaires; f) junction boxes for submersible lighting systems; and g) forming shells for use with wet-niche luminaires. 1.4 This Standard does not apply to luminaires or junction boxes covered by other CSA standards such as: a) Low voltage landscape luminaires covered by CSA C22.2 No. 250.7. b) In ground recessed luminaires covered by CSA C22.2 No. 250.0. c) Junction or outlet boxes covered by CSA C22.2 No. 18.1 and CSA C22.2 No. 18.2. 1.5 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 1.6 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. 1.7 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
Edition
Not found
Published Date
2026-10-05
Status
Not found
Pages
116
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
Preface This is the third edition of CSA C22.2 No. 89, Swimming-pool luminaires, submersible luminaires, and accessories, part of the Canadian Electrical Code, Part II. It supersedes the previous editions published in 1976 and 1968. This Standard also replaces the following Technical Information Letter (TIL), for products covered in this Standard: CSA TIL No. B-44, Permanently Connected, Cord-Connected and Direct Plug-In Lighting Systems Incorporating Nicheless Luminaire Assemblies that Employ Extra-Low Voltage Incandescent Lamps for Use in Pools. For general information on the Standards of the Canadian Electrical Code, Part II, see the Preface of CAN/CSA-C22.2 No. 0, General requirements — Canadian Electrical Code, Part II. This Standard is considered suitable for use for conformity assessment within the stated scope of the Standard. This Standard was prepared by the Integrated Committee on Lighting Products, under the jurisdiction of the Technical Committee on Consumer and Commercial Products and the Strategic Steering Committee on Requirements for Electrical Safety. Scope 1.1 This Standard applies to submersible lighting systems and associated components for installation in accordance with the Canadian Electrical Code, Part I that are: a) permanently connected to branch circuit; or b) portable type, cord-connected or direct plug-in type. 1.2 This Standard covers submersible lighting systems for connection to a supply circuit of not more than 150 V, intended for swimming pools, spas, hot tubs, fountains, decorative pools, waterfalls, and similar submersible applications. 1.3 This Standard applies to the following associated components: a) isolating-type power supply; b) double insulated power supply; c) one or more luminaire assemblies of the incandescent, fluorescent, CFL, HID, or any LED technologytype; d) flexible cable and associated connectors intended for use in the secondary circuit; e) junction and deck boxes for swimming pool luminaires; f) junction boxes for submersible lighting systems; and g) forming shells for use with wet-niche luminaires. 1.4 This Standard does not apply to luminaires or junction boxes covered by other CSA standards such as: a) Low voltage landscape luminaires covered by CSA C22.2 No. 250.7. b) In ground recessed luminaires covered by CSA C22.2 No. 250.0. c) Junction or outlet boxes covered by CSA C22.2 No. 18.1 and CSA C22.2 No. 18.2. 1.5 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 1.6 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. 1.7 In this Standard, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

CSA E61558-2-13:25 – Safety of transformers, reactors, power supply units and combinations thereof — Part 2-13: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformers for general applications (Adopted IEC 61558-2-13:2022, third edition, 2022-10, with Canadian deviations) | Sécurité des transformateurs, bobines d’inductance, blocs d’alimentation et combinaisons de ces éléments — Partie 2-13 : Exigences particulières et essais pour les autotransformateurs et les blocs d’alimentation qui incorporent des autotransformateurs pour applications d’ordre général (norme IEC 61558-2-13:2022 adoptée, troisième édition, 2022-10, avec exigences propres au Canada)
CDN $205.00 Add to cart -

CSA C22.3 NO. 5.1:93 (R2022) – Recommended practices for electrical protection – Electric contact between overhead supply and communication lines
CDN $149.00 Add to cart -

CSA E61951-2:21 (R2026) – Secondary cells and batteries containing alkaline or other non-acid electrolytes — Secondary sealed cells and batteries for portable applications — Part 2: Nickel-metal hydride (Adopted IEC 61951-2:2017, fourth edition, 2017-03, with Canadian deviations) | Accumulateurs alcalins et autres accumulateurs à électrolyte non acide — Accumulateurs étanches pour applications portables — Partie 2 : Nickel-métal hydrure (norme IEC 61951-2:2017 adoptée, quatrième édition, 2017-03, avec exigences propres au Canada)
CDN $527.00 Add to cart -

CSA E61959:14 (R2024) – Secondary cells and batteries containing alkaline or other non-acid electrolytes – Mechanical tests for sealed portable secondary cells and batteries (Adopted IEC 61959:2004, first edition, 2004-01, with Canadian deviations) | Accumulateurs alcalins et autres accumulateurs à électrolyte non acide – Essais mécaniques pour accumulateurs portables étanches (norme CEI 61959:2004 adoptée, première édition, 2004-01, avec exigences propres au Canada)
CDN $56.00 Add to cart







