Sky Bear Technical Standards - Home
Search
×
FR

Placeholder headline

This is just a placeholder headline

CSA A123.21:26 – Standard test method for the dynamic wind uplift resistance of membrane-roofing systems

$

236

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-A123.2-03 (R2023) – Asphalt-coated roofing sheets

$

150

BUY NOW

Placeholder headline

This is just a placeholder headline

A123.23-15 (R2025) – Product specification for polymer-modified bitumen sheet, prefabricated and reinforced

$

118

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA A123.24:21 (R2026) – Standard test method for wind resistance of vegetated roof assembly

$

161

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA A123.25:18 (R2023) – Asphalt core boards used in roofing

$

197

BUY NOW

Placeholder headline

This is just a placeholder headline

A123.3-05 (R2020) – Asphalt saturated organic roofing felt

$

150

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-A123.4-04 (R2023) – Asphalt for constructing built-up roof coverings and waterproofing systems

$

150

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA A123.5:16 (R2020) – Asphalt shingles made from glass felt and surfaced with mineral granules

$

197

BUY NOW

CSA C22.2 NO. 4248.14:23

CSA C22.2 NO. 4248.14:23 – Fuseholders — Part 14: Supplemental fuseholders (Trinational standard with UL 4248-14 and NMX-J-4248-14-ANCE)

CDN $292.00

Fuseholders — Part 14: Supplemental fuseholders (Trinational standard with UL 4248-14 and NMX-J-4248-14-ANCE)

SKU: 2429746 Categories: ,

Description

Preface This is the harmonized ANCE, CSA Group, and ULSE standard for Fuseholders – Part 14: Supplemental Fuseholders . It is the first edition of NMX-J-4248-14-ANCE, CSA C22.2 No. 4248.14 and UL 4248-14. This harmonized standard was prepared by the Association of Standardization and Certification, (ANCE), CSA Group and ULSE. The efforts and support of the Technical Harmonization Subcommittee on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. The present Mexican standard was developed by the CT 32 “Fusibles” from the Comite de Normalizacion de la Asociacion de Normalizacion y Certificacion, A.C., CONANCE, with the collaboration of the fuse manufacturers and users. This standard was reviewed by the CSA Subcommittee on Fuses and Fuseholders, under the jurisdiction of the CSA Technical Committee on Industrial Products and the CSA Strategic Steering Committee on requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been developed in compliance with the Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Part is intended to be read together with the Standard for Fuseholders – Part 1: General Requirements, hereafter referred to as Part 1. The titles of the Clauses in this Part correspond to the similarly titled Clauses in Part 1. The requirements of Part 1 apply unless modified by this Part. For the Part 1 requirements, refer to the Standard for Fuseholders – Part 1: General Requirements, NMX-J-009/4248/1-ANCE / CSA C22.2 No. 4248.1 / UL 4248-1. 1.2 These requirements apply to fuseholders intended for use with Supplemental Fuses as described in NMX-J-009/248/14-ANCE, CSA C22.2 No. 248.14, UL 248-14, Low-Voltage Fuses – Part 14: Supplemental Fuses.

Edition

Not found

Published Date

2026-10-05

Status

Not found

Pages

22

Language Detail Icon

English

Format Secure Icon

Secure PDF

Abstract

Preface This is the harmonized ANCE, CSA Group, and ULSE standard for Fuseholders – Part 14: Supplemental Fuseholders . It is the first edition of NMX-J-4248-14-ANCE, CSA C22.2 No. 4248.14 and UL 4248-14. This harmonized standard was prepared by the Association of Standardization and Certification, (ANCE), CSA Group and ULSE. The efforts and support of the Technical Harmonization Subcommittee on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. The present Mexican standard was developed by the CT 32 “Fusibles” from the Comite de Normalizacion de la Asociacion de Normalizacion y Certificacion, A.C., CONANCE, with the collaboration of the fuse manufacturers and users. This standard was reviewed by the CSA Subcommittee on Fuses and Fuseholders, under the jurisdiction of the CSA Technical Committee on Industrial Products and the CSA Strategic Steering Committee on requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been developed in compliance with the Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Part is intended to be read together with the Standard for Fuseholders – Part 1: General Requirements, hereafter referred to as Part 1. The titles of the Clauses in this Part correspond to the similarly titled Clauses in Part 1. The requirements of Part 1 apply unless modified by this Part. For the Part 1 requirements, refer to the Standard for Fuseholders – Part 1: General Requirements, NMX-J-009/4248/1-ANCE / CSA C22.2 No. 4248.1 / UL 4248-1. 1.2 These requirements apply to fuseholders intended for use with Supplemental Fuses as described in NMX-J-009/248/14-ANCE, CSA C22.2 No. 248.14, UL 248-14, Low-Voltage Fuses – Part 14: Supplemental Fuses.

Previous Editions

Can’t find what you are looking for?

Please contact us at: