
CSA C22.2 NO. 42:10 (R2025)
CSA C22.2 NO. 42:10 (R2025) – General use receptacles, attachment plugs, and similar wiring devices
CDN $197.00
General use receptacles, attachment plugs, and similar wiring devices
Description
Preface This is the seventh edition of CSA C22.2 No. 42, General use receptacles, attachment plugs, and similar wiring devices, part of a series of Standards issued by CSA International under Part II of the Canadian Electrical Code. This edition supersedes the previous editions, published in 1999, 1984, 1979, 1959, 1942, and 1937. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Standard applies to the following wiring devices of the general purpose nonlocking and locking types, rated 60 A and less, and intended for use in accordance with the Canadian Electrical Code, Part I: a) general use and hospital-grade attachment plugs; b) adapters without male or female screwshell; c) general use and hospital-grade receptacles, as well as 15 and 20 A straight-blade general use and hospital-grade plugs and receptacles, suitable for use in an ambient temperature up to 50 °C; d) receptacles intended for use with copper or aluminum wire; e) self-contained receptacles; f) general use and hospital-grade cord connectors; g) current taps and similar devices (e.g., flanged equipment power inlets and outlets); h) the following devices for use with copper conductor, nonmetallic sheathed cables for mounting without a separate outlet box, in accordance with the Rules of the Canadian Electrical Code, Part I: i) self-contained receptacles, intended for flush mounting, rated 15 and 20 A, 125 and 250 V; and ii) surface-mounted receptacles rated 15 and 20 A, 125 and 250 V; i) devices with varistors intended for surge suppression of connected loads; and j) receptacles with more than two sets of female contacts such as triplex, quadruplex, etc. 1.2 This Standard does not apply to the following products: (a) pull-off plugs, which are addressed in CSA C22.2 No. 57; (b) receptacles, attachment plugs, connectors, and adapters intended for use in hazardous locations, which are addressed in CSA C22.2 No. 159; (c) receptacles, attachment plugs, connectors, and adapters of the special-use types, which are addressed in CSA C22.2 No. 182.1, CSA C22.2 No. 182.2, CSA C22.2 No. 182.3, and CAN/CSA-C22.2 No. 182.4; (d) metal and nonmetallic flush device cover plates, which are addressed in CAN/CSA-C22.2 No. 42.1; and (e) devices having male or female screwshells, which are addressed in CSA C22.2 No. 43. 1.3 In CSA standards, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.
Edition
Not found
Published Date
2026-10-05
Status
Not found
Pages
119
Format 
Secure PDF
Secure – PDF details
- Save your file locally or view it via a web viewer
- Viewing permissions are restricted exclusively to the purchaser
- Device limits - 3
- Printing – Enabled only to print (1) copy
See more about our Environmental Commitment
Abstract
Preface This is the seventh edition of CSA C22.2 No. 42, General use receptacles, attachment plugs, and similar wiring devices, part of a series of Standards issued by CSA International under Part II of the Canadian Electrical Code. This edition supersedes the previous editions, published in 1999, 1984, 1979, 1959, 1942, and 1937. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 This Standard applies to the following wiring devices of the general purpose nonlocking and locking types, rated 60 A and less, and intended for use in accordance with the Canadian Electrical Code, Part I: a) general use and hospital-grade attachment plugs; b) adapters without male or female screwshell; c) general use and hospital-grade receptacles, as well as 15 and 20 A straight-blade general use and hospital-grade plugs and receptacles, suitable for use in an ambient temperature up to 50 °C; d) receptacles intended for use with copper or aluminum wire; e) self-contained receptacles; f) general use and hospital-grade cord connectors; g) current taps and similar devices (e.g., flanged equipment power inlets and outlets); h) the following devices for use with copper conductor, nonmetallic sheathed cables for mounting without a separate outlet box, in accordance with the Rules of the Canadian Electrical Code, Part I: i) self-contained receptacles, intended for flush mounting, rated 15 and 20 A, 125 and 250 V; and ii) surface-mounted receptacles rated 15 and 20 A, 125 and 250 V; i) devices with varistors intended for surge suppression of connected loads; and j) receptacles with more than two sets of female contacts such as triplex, quadruplex, etc. 1.2 This Standard does not apply to the following products: (a) pull-off plugs, which are addressed in CSA C22.2 No. 57; (b) receptacles, attachment plugs, connectors, and adapters intended for use in hazardous locations, which are addressed in CSA C22.2 No. 159; (c) receptacles, attachment plugs, connectors, and adapters of the special-use types, which are addressed in CSA C22.2 No. 182.1, CSA C22.2 No. 182.2, CSA C22.2 No. 182.3, and CAN/CSA-C22.2 No. 182.4; (d) metal and nonmetallic flush device cover plates, which are addressed in CAN/CSA-C22.2 No. 42.1; and (e) devices having male or female screwshells, which are addressed in CSA C22.2 No. 43. 1.3 In CSA standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.
Previous Editions
Can’t find what you are looking for?
Please contact us at:
Related Documents
-

CSA SPE-3000:19 – Model code for the field evaluation of medical electrical equipment (MEE) and medical electrical systems (MES)
CDN $334.00 Add to cart -

CAN/CSA-E61558-1:12 (R2022) – Safety of power transformers, power supplies, reactors and similar products – Part 1: General requirements and tests (Adopted IEC 61558- 1:1997 + A1:1998, edition 2.1, 2009-04 with Canadian deviations) | Sécurité des transformateurs, alimentations, bobines d’inductance et produits analogues – Partie 1: Exigences générales et essais (norme CEI 61558-1:1997 + A1:1998 adoptée, édition 2.1, 2009-04 avec exigences propres au Canada)
CDN $630.00 Add to cart -

CSA TS-117:23 – National technical specification for terminology for the decentralized energy industry in Canada
CDN $79.00 Add to cart -

CSA E61951-2:21 (R2026) – Secondary cells and batteries containing alkaline or other non-acid electrolytes — Secondary sealed cells and batteries for portable applications — Part 2: Nickel-metal hydride (Adopted IEC 61951-2:2017, fourth edition, 2017-03, with Canadian deviations) | Accumulateurs alcalins et autres accumulateurs à électrolyte non acide — Accumulateurs étanches pour applications portables — Partie 2 : Nickel-métal hydrure (norme IEC 61951-2:2017 adoptée, quatrième édition, 2017-03, avec exigences propres au Canada)
CDN $527.00 Add to cart







