Search
×
FR

Placeholder headline

This is just a placeholder headline

API Technical Report TDB-6 Chapter 6 – Density

$

204

BUY NOW

Placeholder headline

This is just a placeholder headline

API STD 560: Fired Heaters for General Refinery Services

$

721

BUY NOW

Placeholder headline

This is just a placeholder headline

API STD 64: Diverter Equipment Systems

$

324

BUY NOW

Placeholder headline

This is just a placeholder headline

API MPMS CH 17.10.1: Refrigerated Light Hydrocarbon Fluids – Measurement of Cargoes on Board LNG Carries

$

417

BUY NOW

Placeholder headline

This is just a placeholder headline

API RP 13B-1: Testing Water-based Drilling Fluids

$

418

BUY NOW

Placeholder headline

This is just a placeholder headline

API Technical Report TDB-12 Chapter 12 – Thermal Conductivity

$

214

BUY NOW

Placeholder headline

This is just a placeholder headline

API 16FI Frac Iron Guidelines and Requirements

$

129

BUY NOW

ISO 28540:2011

ISO 28540:2011 Water quality – Determination of 16 polycyclic aromatic hydrocarbons (PAH) in water – Method using gas chromatography with mass spectrometric detection (GC-MS)

CDN $273.00

SKU: edc22f925ce2 Category:

Description

ISO 28540:2011 specifies a method for the determination of at least 16 selected PAH (see Table 1) in drinking water and ground water in mass concentrations above 0,005 µg/l and surface water in mass concentrations above 0,01 µg/l (for each individual compound).

ISO 28540:2011 can be used for samples containing up to 150 mg/l of suspended matter.

This method is, with some modification, also suitable for the analysis of waste water. It is possible that this method is applicable to other PAH, provided the method is validated for each case.

Edition

1

Published Date

2011-07-21

Status

PUBLISHED

Pages

27

Language Detail Icon

English

Format Secure Icon

Secure PDF

Abstract

ISO 28540:2011 specifies a method for the determination of at least 16 selected PAH (see Table 1) in drinking water and ground water in mass concentrations above 0,005 µg/l and surface water in mass concentrations above 0,01 µg/l (for each individual compound).

ISO 28540:2011 can be used for samples containing up to 150 mg/l of suspended matter.

This method is, with some modification, also suitable for the analysis of waste water. It is possible that this method is applicable to other PAH, provided the method is validated for each case.

Previous Editions

Can’t find what you are looking for?

Please contact us at: