Sky Bear Technical Standards - Home
Search
×
FR

Placeholder headline

This is just a placeholder headline

CSA A123.21:26 – Standard test method for the dynamic wind uplift resistance of membrane-roofing systems

$

236

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-A123.2-03 (R2023) – Asphalt-coated roofing sheets

$

150

BUY NOW

Placeholder headline

This is just a placeholder headline

A123.23-15 (R2025) – Product specification for polymer-modified bitumen sheet, prefabricated and reinforced

$

118

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA A123.24:21 (R2026) – Standard test method for wind resistance of vegetated roof assembly

$

161

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA A123.25:18 (R2023) – Asphalt core boards used in roofing

$

197

BUY NOW

Placeholder headline

This is just a placeholder headline

A123.3-05 (R2020) – Asphalt saturated organic roofing felt

$

150

BUY NOW

Placeholder headline

This is just a placeholder headline

CAN/CSA-A123.4-04 (R2023) – Asphalt for constructing built-up roof coverings and waterproofing systems

$

150

BUY NOW

Placeholder headline

This is just a placeholder headline

CSA A123.5:16 (R2020) – Asphalt shingles made from glass felt and surfaced with mineral granules

$

197

BUY NOW

CSA C22.2 NO. 18.4:15 (R2024)

CSA C22.2 NO. 18.4:15 (R2024) – Hardware for the support of conduit, tubing, and cable (Bi-national standard with UL 2239)

CDN $732.00

Hardware for the support of conduit, tubing, and cable (Bi-national standard with UL 2239)

SKU: 2422899 Categories: ,

Description

Preface This is the harmonized CSA Group and ULSE standard for Hardware for the Support of Conduit, Tubing, and Cable . It is the second edition of CSA C22.2 No. 18.4 and the second edition of UL 2239. This harmonized standard has been jointly revised on July 15, 2024. For this purpose, CSA Group and ULSE are issuing revision pages dated July 15, 2024. This harmonized standard was prepared by CSA Group and ULSE Inc. ULSE). The efforts and support of the Technical Harmonization Subcommittee for Conduit and Cable Hardware, of the Council on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 These requirements cover hardware for the support of conduit, tubing, and cable, such as HANGERS, STAPLES, STRAPS, and similar devices for installation in accordance with the National Electrical Code, NFPA 70, and the Canadian Electrical Code (CEC), Part I. 1.2 These requirements also cover STANDOFFS for nonmetallic-sheathed cable, PROTECTOR PLATES, and PROTECTOR BUSHINGS. 1.3 These requirements do not cover hardware for use with surface raceway, wireway, or busway systems, sprinkler systems, and other piping systems used for fire protection service, hardware for use with lighting fixtures, or hardware for grounding and bonding applications. 1.4 These requirements do not cover: a) Hardware intended to support boxes (see UL 514A or CSA C22.2 No. 18.1) b) Conduit and cable fittings (see UL 514B or CSA C22.2 No. 18.3) c) Reducing washers (see UL 514B or CSA C22.2 No. 18.3) d) Pulling grips for cable or cord (see UL 514B or CSA C22.2 No. 18.3) e) Cable ties (see UL 1565 or CSA C22.2 No. 18.5), or f) POSITIONING DEVICES (see UL 1565 or CSA C22.2 No. 18.5).

Edition

Not found

Published Date

2026-10-05

Status

Not found

Pages

60

Language Detail Icon

English

Format Secure Icon

Secure PDF

Abstract

Preface This is the harmonized CSA Group and ULSE standard for Hardware for the Support of Conduit, Tubing, and Cable . It is the second edition of CSA C22.2 No. 18.4 and the second edition of UL 2239. This harmonized standard has been jointly revised on July 15, 2024. For this purpose, CSA Group and ULSE are issuing revision pages dated July 15, 2024. This harmonized standard was prepared by CSA Group and ULSE Inc. ULSE). The efforts and support of the Technical Harmonization Subcommittee for Conduit and Cable Hardware, of the Council on the Harmonization of Electrotechnical Standards of the Nations of the Americas (CANENA), are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This Standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group. Scope 1.1 These requirements cover hardware for the support of conduit, tubing, and cable, such as HANGERS, STAPLES, STRAPS, and similar devices for installation in accordance with the National Electrical Code, NFPA 70, and the Canadian Electrical Code (CEC), Part I. 1.2 These requirements also cover STANDOFFS for nonmetallic-sheathed cable, PROTECTOR PLATES, and PROTECTOR BUSHINGS. 1.3 These requirements do not cover hardware for use with surface raceway, wireway, or busway systems, sprinkler systems, and other piping systems used for fire protection service, hardware for use with lighting fixtures, or hardware for grounding and bonding applications. 1.4 These requirements do not cover: a) Hardware intended to support boxes (see UL 514A or CSA C22.2 No. 18.1) b) Conduit and cable fittings (see UL 514B or CSA C22.2 No. 18.3) c) Reducing washers (see UL 514B or CSA C22.2 No. 18.3) d) Pulling grips for cable or cord (see UL 514B or CSA C22.2 No. 18.3) e) Cable ties (see UL 1565 or CSA C22.2 No. 18.5), or f) POSITIONING DEVICES (see UL 1565 or CSA C22.2 No. 18.5).

Previous Editions

Can’t find what you are looking for?

Please contact us at: